Dimensions Guide

H71
© 2006 American Standard Inc.
Revised 3/06
Components Required:
Bath Filler*: (specify  nish)
Bath Drain: 1599.205.XXX (specify color)
Five Foot Apron: 9261.019.XXX (specify color)
E-Z-Install™ Whirlpool Heater - EZHEAT-100
Tile Bead Kit: TILE-BEAD
For color/ nish availability and other faucet choices, please
see the Product Selector and Pricing Guide.
NOTE: E-Z-Install™ Whirlpool Heater is designed to maintain
water temperature during operation. It will not heat cold water
to desired bathing temperature.
EVOLUTION™ 5' X 36"
Bathing design with form- tted backrest and
molded-in armrests
2771V (specify color)
Acrylic with  berglass reinforcement
Deep Soak Over ow Drain for maximum
water depth
1.4 HP self-draining pump/motor
Eight  ow adjustable jets including:
- Two adjustable Ideal Flow Comfort Jets
- Six adjustable Comfort Jets
Two silent air volume controls
Side-mounted On/Off control
Complete factory installed and tested
whirlpool system
Self leveling feet
Designed for undermount installation option
2771VC (specify color)
Same as above with the EverClean™ whirlpool
system featuring Antimicrobial AlphaSan
®
2771VAC EverClean™ Air Spa
Features Antimicrobial AlphaSan
®
1.25 HP single speed pump/motor
Side mounted air switch On/Off
Eight Comfort Air jet system
Quick connect EZ Install heater system
(must order EZ Install heater separately)
2771VA Air Spa
Same as 7236 VAC without Antimicrobial
AlphaSan
®
Nominal Dimensions:
60" x 36" x 19-3/4"
(1524 x 914 x 502mm)
Compliance Certi cations -
Meets or Exceeds the Following Speci cations:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
AND PRODUCT SPECIFICATIONS
* See American Standard Faucet Selector
EVOLUTION™ 5' X 36"
BY AMERICAN STANDARD
HIGH GLOSS ACRYLIC

Summary of content (2 pages)