Specification

14
© 2009 AS America Inc.
H
2
OPTION SIPHONIC DUAL FLUSH
ROUND FRONT TOILET
VITREOUS CHINA
H
2
OPTION SIPHONIC DUAL FLUSH
ROUND FRONT TOILET
❑ 2889.216
• Vitreous china
• High efciency, low consumption
- Full Flush (6.0 Lpf/1.6 gpf)
- Partial Flush (3.8 Lpf/1.0 gpf)
• Round front siphon action bowl with direct-fed jet
• Meets EPA WaterSense
SM
criteria
• Qualies in LEEDS Program
• 305mm (12") rough-in
• Fully glazed 2" Trapway
• Generous 9" x 8" water surface area
• Chrome plated top mounted push button actuator
• Sanitary bar on bowl
• 2 color matched bolt caps
• 100% factory ush tested
• 5 Year Limited Warranty on Total Toilet
❑ 2889.516 Same as above, except with Tank with
AquaGuard Liner
Separate Component Parts:
❑ 3708.216 Bowl
❑ 4339.216 Tank
❑ 4339.516 Tank with AquaGuard Liner
Nominal Dimensions:
705 x 380 x 749mm
(27-3/4" x 15" x 29-1/2")
Fixture only, seat and supply by others
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.2-2008/CSA B45.1-08
• Los Angeles Department of Water and Power
Supplementary Purchase Specication for
Non-Adjustability
• US EPA WaterSense
SM
criteria for HET's
NOTES:
THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM
DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
*
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerance established by ANSI Standard A112.19.2
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
C/L OF SEAT POST HOLES
5-1/2" (140 mm) CENTERS
27-3/4"
(705 mm)
8-1/2"
(213 mm)
16-1/2"
(419 mm)
15"
(380 mm)
9-1/2"
(238 mm)
29-1/2"
(749 mm)
*
10"
(254 mm)
15"
(381 mm)
12-3/4"
(324 mm)
3/4"
(19 mm)
7"
(180 mm)
12"
(308 mm)
C/L OF OUTLET
FINISHED FLOOR
FINISHED WALL
3-5/8"
(92mm)
SUPPLY
AS
REQ'D
14"
(356 mm)
*
6"
(152 mm)
1" ± 1/4"
(25mm ± 6mm)
To Be Specied:
❏ Color: ❏ White ❏ Bone ❏ Linen
❏ Seat: American Standard #5322.011 “Rise and
Shine" solid plastic closed front seat with cover.
❏ Seat: American Standard #5308.012 “Laurel"
molded closed front seat with cover.
❏ Seat: American Standard #5320.110 EverClean™
Round Front Seat with Cover and Slow Close
Snap-Off hinges
❏ Alternate Seat:
❏ Supply with stop:
Certified by
IAPMO R&T
Revised 7/09