Specification

ManualsBrandsAmerican Standard ManualsBathChampion 4 Right Height 1.6 GPF Elongated Toilet Bowl Only in Linen

WILLIAMSBURG CHAMPION®

ELONGATED RIGHT HEIGHT™ TOILET

VITREOUS CHINA

WILLIAMSBURG CHAMPION® ELONGATED

RIGHT HEIGHT™ TOILET

❏ 3225.016 Elongated Right Height™ Bowl

❏ 4281.702 Tank

• Vitreous china

• Low-consumption (6.0 Lpf/1.6 gpf)

• Features Champion® Flushing System

performance platform

• 3” non-adjustable, flapper-free flush valve

• Elongated siphon action jetted bowl

• 2-3/8” fully-glazed trapway

• Speed Connect™ tank/bowl coupling system

• Chrome-plated trip lever

• Sweeping pier on bowl

• 100% factory flush tested

• 2 bolt caps

• 10 year warranty

Nominal Dimensions:

30-3/8" x 18-7/8" x 34-3/8"

(772 x 479 x 873mm)

Fixture only, seat and supply by others

Compliance Certifications -

Meets or Exceeds the Following Specifications:

• ASME A112.19.2M (and 19.6M) for Vitreous China

Fixtures - includes Flush Performance, Ball Pass

Diameter, Trap Seal Depth and all Dimensions

• Los Angeles Department of Water and Power

Supplementary Purchase Specification for Non-

Adjustability - July, 2003 revision

To Be Specified

❏ Color:

❏ Seat: (please specify color)

❏ Champion® Slow Close Elongated #5325.010

❏ Rise & Shine Elongated #5324.019

❏ Laurel Elongated #5311.012

❏ Supply with stop:

FINISHED WALL

19mm ± 6mm

(1 ± 1/4)

419mm

(16-1/2)

FINISHED

FLOOR

305mm

(12)

772mm

(30-3/8)

C/L OF OUTLET

83mm

(3-1/4)

216mm

(8-1/2)

470mm

(18-1/2)

C/L OF SEAT POST HOLES

140mm (5-1/2 CENTERS)

362mm

(14-1/4)

264mm

(10-3/8)

16mm

(5/8)

873mm

(34-3/8)

479mm

(18-7/8)

SUPPLY

REQ'D

254mm

(10)

152mm

(6)

254mm

(10)

356mm

(14)

NOTES:

THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12")

FROM FINISHED WALL TO C/L OF OUTLET.

SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.

DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances

established by ANSI Standard A112.19.2.

These measurements are subject to change or cancellation. No responsibility is assumed for use

of superseded or voided pages.

03/05