Use and Care Guide

B97
© 2013 AS America Inc.
COLONY
®
SOFT
TWO-HANDLE BATH/SHOWER FITTING
GENERAL DESCRIPTION:
Cast brass valve body on 8 inch centers. 1/4 turn
washerless ceramic disc valve cartridges - reversible for
use with either lever or knob handles. 1/2" N.P.T. male
threaded / 1/2" sweat inlets and 1/2" N.P.T. outlets. Easy
clean showerhead with 2.5 gpm/9.5L/min. flow restrictor.
3275.502 Shown
MODEL NUMBER:
3275.502 Bath/Shower Fitting
Slip-on diverter tub spout. Easy Clean
showerhead. Lever handles.
3275.501 Shower Only Fitting
Easy Clean showerhead. Lever handles.
3275.505 Wall-Mounted Tub Filler
Slip-on tub spout. Lever handles.
PRODUCT FEATURES:
Brass Construction: Durable - Ideal for prolonged
contact with water. Provides the finest surface for
application of all finishes.
Ceramic Disc Valve Cartridges: Assures a lifetime
of smooth handle operation and drip-free performance.
Exclusive Handle Alignment System: Allows fine
tuning of handle position.
Choice of Finishes: Available in Polished Chrome or
Polished Brass PVD.
Exclusive Plaster Guard: Plaster guard can be used
to test for leaks prior to handle installation.
SUGGESTED SPECIFICATION:
Two handle bath/shower fitting shall feature cast brass construction. Shall also feature 1/4 turn washerless ceramic disc valve
cartridges that are reversible for use with lever or knob handles. Fitting shall be American Standard Mode # 3275.___.___.
92mm
(3-5/8" REF.)
165mm
(6-1/2" REF.)
FINISHED WALL
1-1/4" DIA HOLE
VALVE INLETS
1/2" N.P.T.F.
1/2" N.P.T. SHOWER ARM
1-1/4" DIA HOLE
1/2" COPPER
38mm
(1-1/2")
REF.
102mm
(4")
121mm
(4-3/4" REF.)
25mm MIN. to 51mm MAX.
(1" MIN. to 2" MAX. )
(2) 1-3/4" DIA. HOLES
FOR VALVES ON 8"
CENTERS
TOP OF TUB RIM
BOTTOM OF TUB
21.5 mm
(15/16")
44mm
1-3/4")
OPTIONAL TO FINISHED
FLOOR USUALLY
BETWEEN
1651mm - 1981mm
(65" - 78")
Revised 6/11