Installation Guide

4
6
7
M968584 Rev. 1.6
CHECK CONNECTIONS FOR LEAKS.
Move HANDLE (1) down into "off" position.
Turn on water supplies and check connections
for leaks
.
CHECK CONNECTIONS
FOR LEAKS
4
1
3
CONNECT SPRAY HOSE AND INSTALL WEIGHTS
With PULL-OUT SPRAY (1) seated in SPOUT (2),
install WEIGHT (3) onto HOSE (4) using SCREW (5).
Locate the WEIGHTS (3) two feet (2') from the
underside of the sink deck. Tighten SCREW (5) firmly.
Make sure SEAL WASHER (7) is installed in COUPLING
NUT (6). Connect threaded end of HOSE (4) to SPRAY HOSE
COUPLING NUT (6) from fitting. Use wrench to tighten.
2
24"
1
5
3