Manualshelf

Instructions / Assembly

ManualsBrandsAmerican Standard ManualsBathCadet Pressure-Assisted 1.6 GPF Toilet Tank Only in White
1234
CAUTION: PRODUCT IS FRAGILE. TO AVOID BREAKAGE AND POSSIBLE INJURY HANDLE WITH CARE!
NOTE: For proper operation the recommended working pressure is between 25 psi at valve when flushing and 80 psi static.
!
INSTALLATION INSTRUCTIONS
TWO-PIECE PRESSURE-ASSISTED TOILETS
Thank you for selecting American Standard - the benchmark of fine quality for over 100 years. To ensure this product is installed
properly, please read these instructions carefully before you begin. (Certain installations may require professional help.) Also be sure
your installation conforms to local codes.
RECOMMENDED TOOLS AND MATERIALS
Putty Knife Regular Screwdriver Adjustable Wrench Sealant Tape Measure
Hacksaw Wax Ring/Gasket Flexible Supply Tube Closet Bolts Carpenters Level
Closet Flange Set (Cadet Toilets) Neoprene or Graphite Felt Gasket (Yorkville Toilets)
1 REMOVE OLD TOILET
a. Close toilet supply valve and flush tank completely. Towel or sponge remaining water from tank and bowl.
b. Disconnect and remove supply line. NOTE: If replacing valve, first shut off main water supply!
c. Remove old mounting hardware, remove toilet and plug floor waste opening to prevent escaping sewer gases.
d. Remove closet bolts from flange and clean away old wax, putty, etc. from base area.
NOTE: Mounting surface must be clean and level before new toilet is installed!
SAVE FOR FUTURE USE
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2016
7301276-100 Rev. B
FOR YORKVILLE TOILETS:
2-1
DIMENSIONS (Nominal) NOTE: Distance from floor to closet
flange centerline (rough-in) must be 4" (102 mm) with flange
surface flush to 1/16" (16mm) max. beyond finished wall.
29-3/4"
(752mm)
18-1/2"
(470mm)
20-1/2"
(516mm)
9"
(230mm)
14"
(356mm)
13-1/2"
(340mm)
12"
(300mm)
16-1/2"
(419mm)
or
15"
(381mm)
30-3/4"
(780mm)
or
29-1/4"
(743mm)
4" (102mm)
9"
(226mm)
1/2" (11mm)
FOR CADET TOILETS:
2-2
DIMENSIONS (Nominal) NOTE: Distance from wall to closet
flange centerline (rough-in) must be 12" (305 mm)
31" (787mm)
29" (737mm)
29"
(737mm)
or
31-1/2"
(800mm)
12"
(305mm)
FINISHED FLOOR
*
8"
(203mm)
SUPPLY
AS
REQ'D
FINISHED WALL
19-1/2"
(495mm)
30-1/4"
(768mm)
20-1/2"
(516mm)
18-1/2"
(470mm)
12"
(305mm)
13-3/4"
(347mm)
9-1/2"
(238mm)
14"
(356mm)
6"
(150mm)
9"
(226mm)
1" (27mm)
29-1/4"
(743mm)
or
30-3/4"
(780mm)
15"
(381mm)
or
16-1/2"
(419mm)
15"
(381mm)
or
16-1/2"
(419mm)
1
2

Summary of content (4 pages)