Installation Guide

7302073-100 Rev. A
POSITION TOILET ON FLANGE
a.
Unplug floor waste opening and install toilet on
closet flange so bolts project through mounting holes.
b. Loosely install retainer washers and nuts. Side of
washers marked "THIS SIDE UP" must face up!
9
10
!
WARNING: Overtightening of
water supply line nuts could
result in breakage and potential
flooding. If the connection leaks
after hand tightening, replace
the supply line. Do not use any
type of sealant on the water
supply connection. Use of
plumber’s putty, pipe dope, or
any other type of sealant will
void the warranty.
Connect water
supply line.
(Sold separately)
Hand tighten nut.
A
B
Turn on water supply.
- 3 -
Adjust water level to level
indicated on tank by turning
water level adjustment knob
to move float cup up or down.
B
A
Water Level
Adjustment Knob
Trip Lever
Rod
Flush
Valve
Flapper
Water Supply
Line
Tank to Bowl
Gasket
Approximate
Water Level
Flush Valve
Chain
Fill Valve
Or Water
Control
Float Cup
Refill Tube
Overflow
Tube
Flapper
Seal
REPAIR PARTS LABEL
LOCATED UNDER TANK LID.