Specification

ManualsBrandsAmerican Standard ManualsBar FaucetsPortsmouth Single-Handle Pull-Down Bar Faucet in Oil Rubbed Bronze

A10 9

Revised 3/14

MODEL NUMBER:

4285.410 Bar Faucet with Pull-Down Spray

4285.410.F15 Bar Faucet with Pull-Down Spray

PRODUCT FEATURES:

Ceramic Disc Valve Cartridge: Assures smooth, precise valve

control and a lifetime of drip-free, maintenance-free performance.

Memory Position Valving: Allows user to turn valve on and

off at preferred temperature setting without readjusting handle

position each time.

Lead Free: Faucet contains ≤ 0.25% total lead content by

weighted average.

Pull-down Spray: Single feature spray.

Integral Check Valves: Prevents back flow.

SUGGESTED SPECIFICATION:

Single control bar faucet shall feature a zinc diecast body with pull-down spray. Shall also feature washerless ceramic disc valve

cartridge, flexible supply hoses and two integral check valves. Fitting shall be American Standard Model # 4285.410.___.___.

CODES AND STANDARDS

These products meet or exceed the following

codes and standards:

ANSI A117.1

ASME A112.18.1

NSF 61/Section 9 & Annex G

CSA B125

GENERAL DESCRIPTION:

Zinc diecast body with brass swivel spout and metal lever

handle. Pull-down spray head. Washerless 35mm ceramic disc

valve cartridge. Complete with two integral check valves. Braided

flexible supply hoses with 3/8" compression connectors. 2.2

gpm/8.3 Lmin. maximum flow rate

, 1. 5 gpm/5.7 L/min,

maximum flow rate for F15 models.

13-1/4"

(337mm)

6-1/2"

(165mm)

10"

(254mm)

2-1/8" (54mm)

9-1/4"

(235mm)

FLOW RATE*

GALLONS PER MINUTE

INLET PRESSURE (PSI)

*Flow rates shown are for mixed hot and cold.

0.0

0.5

1.0

1.5

2.0

2.5

3.0

10080604020

2.2gpm/8.3L/min. FLOW RATE

4285.410

Single Control Pull-Down Bar Faucet - 2.2 gpm/8.3 L/min. maximum flow rate

4285.410.F15

Single Control Pull-Down Bar Faucet - 1.5 gpm/5.7 L/min. maximum flow rate

Product

Number

Description

Finish Options

Polished

Chrome

002

Stainless

Steel

(PVD)

075

Oil

Rubbed

Bronze

224

Meets the American Disabilities Act Guidelines

and ANSI A117.1 Requirements for the

physically challenged.

(178mm)

FLOW RATE*

GALLONS PER MINUTE

INLET PRESSURE (PSI)

*Flow rates shown are for mixed hot and cold.

0.0

0.5

1.0

1.5

2.0

10080604020

1. 5 gpm/5.7 L/min. FLOW RATE

PORTSMOUTH

SINGLE CONTROL PULL-DOWN BAR FAUCET

Summary of content (2 pages)

PAGE 1
PORTSMOUTH® SINGLE CONTROL PULL-DOWN BAR FAUCET MODEL NUMBER: 4285.410 Bar Faucet with Pull-Down Spray 4285.410.F15 Bar Faucet with Pull-Down Spray 7" (178mm) 10" (254mm) 2-1/8" (54mm) 13-1/4" (337mm) 9-1/4" (235mm) 6-1/2" (165mm) GENERAL DESCRIPTION: Zinc diecast body with brass swivel spout and metal lever handle. Pull-down spray head. Washerless 35mm ceramic disc valve cartridge. Complete with two integral check valves. Braided flexible supply hoses with 3/8" compression connectors. 2.2 gpm/8.
PAGE 2
PORTSMOUTH® SINGLE CONTROL PULL-DOWN BAR FAUCET CODES AND STANDARDS FLOW RATE* GALLONS PER MINUTE These products meet or exceed the following codes and standards: ANSI A117.1 ASME A112.18.1 NSF 61/Section 9 & Annex G CSA B125 3.0 2.5 2.0 1.5 1.0 0.5 0.0 20 40 60 80 100 INLET PRESSURE (PSI) *Flow rates shown are for mixed hot and cold. 2.2gpm/8.3L/min. FLOW RATE FLOW RATE* GALLONS PER MINUTE 2.0 1.5 1.0 0.5 0.