Specification Sheet

A87
© 2012 AS America Inc.
MODEL NUMBER:
4433.410 Bar Faucet with Pull-Down Spray
Escutcheon plate, (use is optional).
PRODUCT FEATURES:
Ceramic Disc Valve Cartridge: Assures smooth, pr
ecise
valve control and a lifetime of drip-free, maintenance-free
performance.
Memory Position Valving: Allows user to turn valve
on
and off at preferred temperature setting without r
eadjusting
handle position each time.
Lead Free: Faucet contains ≤ 0.25% total lead content by
weighted average.
Integral Check Valves: Prevents back flow.
SUGGESTED SPECIFICATION:
Single control kitchen pull-down faucet shall feature a metal swivel spout with pull-down spray with two check valves, metal
escutcheon plate and handle. Shall also feature washerless ceramic disc valve cartridge and flexible Stainless Steel supply
hoses. Faucet shall be American Standard Model # 4433.410.____
4433.410
Pull-Down bar faucet.
GENERAL DESCRIPTION:
Metal handle and escutcheon plate. Swivel spout (150˚ rotation)
with pull-down spray. Washerless 40mm ceramic disc valve
cartridge. Braided flexible Stainless Steel supply hoses with 3/8"
compression connections. Metal mounting shank with brass
fixation ring. Complete with two integral check valves.
2.2gpm/8.3L/min. maximum flow rate. Fitting can be mounted with
or without escutcheon plate (escutcheon size 10-1/16"L x 2-1/2"W).
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ANSI A117.1
ASME A112.18.1
NSF 61/Section 9 & Annex G
CSA B125
Product
Number
Description
Finish Options
Polished
Chrome
002
Stainless
Steel
(PVD)
075
Oil
Rubbed
Bronze
224
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
FLOW RATE*
GALLONS PER MINUTE
INLET PRESSURE (PSI)
*Flow rates shown are for mixed hot and cold.
0.0
0.5
1.0
1.5
2.0
2.5
3.0
10080604020
2.2gpm/8.3L/min. FLOW RATE
358mm
(14")
97mm
(3-13/16")
163mm
(6-7/16")
238mm
(9-3/8")
PULL DOWN
SPRAY
64mm
(2-1/2")
70mm
(2-3/4")
57mm(2-1/4")
WITH ESCUTCHEON
76mm(3")
LESS ESCUTCHEON
SUPPLIES ARE
3/8 COMPRESSION
35 to 38mm
(1-3/8" to 1- 1/2")
DIA. MOUNTING
HOLE
255mm
(10-1/16")
533mm
(21")
Revised 4/12
QUINCE
™
HIGH ARC BAR FAUCET
WITH PULL-DOWN SPRAY