Specification Sheet

K2-217
© 2017 AS America Inc.
spec_204AA.104 Edgemere RHel-12 4/17
EDGEMERE
®
RIGHT HEIGHT
®
ELONGATED 12" ROUGH TOILET
VITREOUS CHINA
EDGEMERE
®
RIGHT HEIGHT
®
ELONGATED
12" ROUGH TOILET
❏ 204AA.104
•Combinationbowlandtank,lessseat
•12"(305mm)rough-in
•Highefficiency,ultra-lowconsumption(1.28gpf/
 4.8Lpf),utilizes20%lesswater
•MeetsEPAWaterSense
®
criteria
•PowerWash
®
rimscrubsbowlwitheachush
•Chrometriplever
•IncludesEZ-InstallTools
•EverClean
®
AntimicrobialSurface
•16-1/2"(419mm)rimheightforaccessible 
 applications
•2"(51mm)fullyglazedtrapway
•9"x8"(229x203mm)watersurfacearea
•3"(76mm)ushvalve
•Five-yearwarranty
•DesigncoordinateswithEdgemereSuite
 ofxtures
❏ 3519A .101RightHeight
®
ElongatedBowl
❏ 4519A.104Tank
Nominal Dimensions:
30-3/16"x17"x31-1/8"
(767x432x790mm)
Fixtureonly,seatandsupplysoldseparately
Compliance Certications -
Meets or Exceeds the Following Specications:
•ASMEA112.19.2/CSAB45.1forVitreousChina
Fixtures
•USEPAWaterSense
®
SpecicationforHETs
BARRIER FREE
FINISHED
FLOOR
1-1/16" (27mm)
FINISHED WALL
8-5/8"
(219mm)
30-3/16"
(767mm)
18-1/2"
(470mm)
3-1/8"
80mm
3-1/2"
90mm
12"
305mm
7-3/8"
188mm
14-3/8"
365mm
16-1/2"
419mm
3/4"
19mm
SUPPLY
AS
REQUIRED
14"
355mm
17"
432mm
10-1/4"
260mm
31-1/8"
790mm
*8"
203mm
*6"
152mm
C/L OF OUTLET
To Be Specied:
❏Color:❏White
❏Seat:AmericanStandard#5257A.65solidplastic
closedfrontelongatedseatwithcover
❏Supplywithstop:
MEETS THE AMERICANS WITH DISABILITIES A
CT GUIDELINES
AND ICC ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND
USABLE BUILDING FACILITIES-CHECK LOCAL CODES.
NOTES:
THISTOILETISDESIGNEDTOROUGH-INATAMINIMUMDIMENSIONOF
305MM(12")FROMFINISHEDWALLTOC/LOFOUTLET.
SUPPLYNOTINCLUDEDWITHFIXTUREANDMUSTBEORDEREDSEPARATELY.
*
DIMENSIONSHOWNFORLOCATIONOFSUPPLYISSUGGESTED.
IMPORTANT: Dimensionsofxturesarenominalandmayvarywithintherangeof
tolerancesestablishedbyANSIStandardA112.19.2.
Thesemeasurementsaresubjecttochangeorcancellation.Noresponsibilityis
assumedforuseofsupersededorvoidedpages.
Certified by
IAPMO R&T