Installation Guide

CONNECT CONTROL BOX
4
M965857 (11/17)
- 3 -
• Connected with the battery box. The IR
BUTTON LIGHT (2) will turn on, and the IP
sensor is adjusting the sensitivity automatically.
Several seconds later, it will then turn off.
5a
5
CONTINUOUS FLOW FUNCTIONALITY
MEASURED FILL FUNCTIONALITY
• Turning the scale to the required amount and touching
the INDUCTION WINDOW (1) will dispense quantitative
water. Light is normally on during quantitative process
and will shut off once the quantitative amount has
been dispensed.
POWER PACK
1
2
• Transfer the calibration loop to position “ ”.
• Continuous ow can be activated two
different ways.
• For Manual Continuous Flow:
Turn the handle on in a desired temperature
location and use the continuous ow.
Manual Flow can override Sensor functionality
anytime.
• For Sensor version of continuous Flow: Touch the
face of knob to activate continuous ow, touch the
face of the knob again to deactivate.