Installation Guide

760237-100 Rev. A 6/17
- 3 -
4B
3B
5B
With the bolts installed, thread the winged nuts,
rubber washers and rubber plugs on to the bolts.
Finger tighten only so that hinge can still turn.
Open the seat and cover. Push
both inside buttons to release seat
and cover. Pull the seat and cover
upwards to take it off the hinges.
7B
6B
While holding the nut, use a
screwdriver to tighten the hinge.
Snap hinges with washer
into holes on the bottom
of the seat.
Place seat with hinges onto bowl.
Align seat with front of bowl.