Installation Guide

- 1 -
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2020
Thank you for selecting American Standard...
the benchmark of fine quality for over 100 years.
To ensure that your installation proceeds smoothly-please read
these instructions carefully before you begin.
RECOMMENDED TOOLS
1 2
M965768 Rev. 1.1 (8/20)
COLONY
®
PRO
Single Control Kitchen Faucet
With Side Spray
INSTALLATION
INSTRUCTIONS
7074.000
7074.010
7074.020
7074.030
7074.040
Certied to comply with ANSI A112.18.1M
INSTALL FAUCET WATER SUPPLY CONNECTIONS
CAUTION
Turn off water at
main supply
• Install FAUCET (1) on sink. (No sealant is required
unless mounting deck on SINK is uneven)
• Secure FAUCET (1) with ATTACHMENT NUT (2)
supplied. (HAND TIGHTEN).
Plumbers' Putty or CaulkingAdjustable WrenchChannel LocksPhillips Screwdriver
1
2
1
3
2
COLD
HOT
SHUT OFF
VALVE
3/8" COMPRESSION
• NOTE: FLEXIBLE HOSES (1, 2) on FAUCET (3) are (24") in length
from base of faucet. If longer supply length is required installer
must purchase adapters and additional supplies to complete
connections. FLEXIBLE HOSES MAY BE REMOVED IF USE OF
3/8" O.D. BULL-NOSE RISERS IS REQUIRED.
IMPORTANT: If SUPPLY HOSES (1, 2) are to long, loop as
illustrated to avoid kinking. (Do not cut Flexible Hoses 1, 2)
• Connection on FLEXIBLE HOSES (1, 2) are 3/8" compression.
Connect LEFT SUPPLY (1) to
Hot shut off valve and RIGHT
SUPPLY (2)
to Cold shut
off valve.
• Use adjustable
wrenches to tighten
connections.
Do not over tighten.