Installation Guide

ManualsBrandsAmerican Standard ManualsBar FaucetsHeritage Single-Handle Bar Faucet in Chrome

Installation

Instructions

34440 REV. 1.6 (5/16)

7100.2XX

7190.132

Certiﬁed to comply with ANSI A112.18.1M

U.S. Patent No. 5,819,789

MODEL 7190.132 MODEL 7100.2XX

012087-0070A

SPOUT SEAL KIT

012087-0070A

SPOUT SEAL KIT

A911758-0070A

RUBBER RING

012671-0070

RUBBER RING

M961714-0070A

MOUNTING KIT

028611-0070A

HANDLE SCREW

028611-0070A

HANDLE SCREW

028610-0070A

CARTRIDGE

A908424-YYY0A

HANDLE

028610-0070A

CARTRIDGE

012088-YYY0A

SWING SPOUT KIT

M922880-YYY0A

AERATOR

012088-YYY0A

SWING SPOUT KIT

M922880-YYY0A

AERATOR

024220-0070A

SUPPLY NUT

030741-0070A

CARTRIDGE SEAL

KIT

065800-0070A

LOCKNUT

SINGLE-HOLE BAR/PANTRY

FAUCET WITH SWING SPOUT

CHROME

POL. BRASS

SATIN NICKEL

SATIN/BRASS

CHROME/POL. BRASS

002

099

295

297

299

Replace the "YYY" with

appropriate ﬁnish code

CHROME

WHITE

BONE

POL. BRASS

002

020

021

099

Replace the "YYY" with

appropriate ﬁnish code

Thank you for selecting American-Standard...

the benchmark of ﬁne quality for over 100 years.

To ensure that your installation proceeds smoothly--

please read these instructions carefully before you begin.

For toll-free information and answers to your questions, call:

1-800-442-1902

Mon. - Fri. 8:00 a.m. to 8:00 p.m. EST

Saturday 10:00 a.m. to 4:00 p.m. EST

IN CANADA 1-800-387-0369 (TORONTO 1-905-306-1093)

Weekdays 8:00 a.m. to 7:00 p.m. EST

IN MEXICO 01-800-839-1200

Product names listed herein are trademarks of American Standard Inc.

HOT LINE FOR HELP

Summary of content (2 pages)

PAGE 1
Installation Instructions 7100.2XX 7190.132 SINGLE-HOLE BAR/PANTRY FAUCET WITH SWING SPOUT Thank you for selecting American-Standard... the benchmark of fine quality for over 100 years. To ensure that your installation proceeds smoothly-please read these instructions carefully before you begin. Certified to comply with ANSI A112.18.1M U.S. Patent No. 5,819,789 34440 REV. 1.6 (5/16) M922880-YYY0A AERATOR MODEL 7190.132 MODEL 7100.
PAGE 2
1 SWING SPOUT ASSEMBLY CAUTION Turn off hot and cold water supplies before beginning. 3 Assemble the SPOUT (3) and tighten the SPOUT NUT (4) until snug on VALVE BODY. 4 2 1 2 FITTING INSTALLATION Remove LOCKNUT (1), BRASS WASHER (2), and GASKET (3) from fitting. Place RUBBER RING (4) in recess of fitting. Insert inlet hoses (on model 7190.132 only) and THREADED SHANK through hole of sink making certain RUBBER RING (4) is properly seated in the recess of the fitting base. MODEL 7100.