Operating Guide

ManualsBrandsAmerican Standard ManualsBar FaucetsHeritage Single-Handle Bar Faucet in Chrome

SINGLE HANDLE

PANTRY/BAR SINK FAUCET

WITH BRASS GOOSENECK SPOUT

GENERAL DESCRIPTION:

Durable brass construction. Amarilis 1/4 trun washerless

ceramic disc valve cartridge. One-half inch male inlet

shank with brass coupling nut and shank nut. Choice of

wrist blade, lever or cross handle. Brass gooseneck swing

spout. 2.2gpm/8.3L/min. maximum flow rate. For cold or

tempered water.

PRODUCT FEATURES:

Brass Construction: Durable - Excellent in high use

applications. Ideal for prolonged contact with water.

Ceramic Disc Valve Cartridge: Assures a lifetime of

drip-free performance.

Low Lead: Meets NSF Standard 61/Section 9 & Prop 65 lead

requirements.

MODEL NUMBER:

7100.241H Pantry/Bar Sink Faucet

Metal Lever handle.

7100.251H Pantry/Bar Sink Faucet

Metal Cross handle.

7100.271H Pantry/Bar Sink Faucet

Brass Wrist Blade handle.

SUGGESTED SPECIFICATION:

Single handle pantry/bar sink faucet shall feature cast brass construction. Shall feature all brass shank nut and coupling nut.

Shall also feature 1/4 turn washerless ceramic disc valve cartridge. Fitting shall be American Standard Model #

7100.____.___.

7100.271H Shown.

127mm

(5)

337mm

(13-1/4)

238mm

(9-3/8)

22mm

(7/8)

DIA.

44mm

(1-3/4)DIA.

35mm

(1-3/8)MAX.

FOR GROUND JOINT

OR 1/2" O.D. SLIP

CONNECTION

53mm

(2-1/16)

51mm

(2)

Summary of content (2 pages)

PAGE 1
SINGLE HANDLE PANTRY/BAR SINK FAUCET WITH BRASS GOOSENECK SPOUT MODEL NUMBER: 7100.241H Pantry/Bar Sink Faucet Metal Lever handle. 7100.251H Pantry/Bar Sink Faucet Metal Cross handle. 7100.271H Pantry/Bar Sink Faucet Brass Wrist Blade handle. 7100.271H Shown. 127mm (5) 337mm (13-1/4) 238mm (9-3/8) 44mm (1-3/4)DIA. 35mm (1-3/8)MAX. 53mm (2-1/16) 22mm (7/8) 51mm (2) DIA. FOR GROUND JOINT OR 1/2" O.D. SLIP CONNECTION GENERAL DESCRIPTION: PRODUCT FEATURES: Durable brass construction.
PAGE 2
SINGLE HANDLE PANTRY/BAR SINK FAUCET WITH BRASS GOOSENECK SPOUT CODES AND STANDARDS ASME A112.18.1M CSA B 125 NSF 61/Section 9 3.0 GALLONS PER MINUTE These products meet or exceed the following codes and standards: FLOW RATE* 2.5 2.0 1.5 1.0 0.5 0.0 20 40 60 80 100 INLET PRESSURE (PSI) *Flow rates shown are for mixed hot and cold. Finish Product Number Description 7100.241H Pantry/Bar faucet. Metal Lever handle. 7100.251H Pantry/Bar faucet. Metal Cross handle. 7100.271H Pantry/Bar faucet.