Specification

ManualsBrandsAmerican Standard ManualsBathEvolution 6 ft. Whirlpool Tub with EverClean in White

H73

EVOLUTION™ 6' X 36"

BY AMERICAN STANDARD

HIGH GLOSS ACRYLIC

Revised 3/06

Components Required:

❏ Bath Filler*: (specify  nish)

❏ Bath Drain: 1599.205.XXX (specify color)

Custom Accessories Available:

❏ Six Foot Apron: 9271.019.XXX (specify color)

❏ E-Z-Install™ Whirlpool Heater - EZHEAT-100

❏ Tile Bead Kit: TILE-BEAD

For color/ nish availability and other faucet choices, please

see the Product Selector and Pricing Guide.

NOTE: E-Z-Install™ Whirlpool Heater is designed to maintain

water temperature during operation. It will not heat cold water

to desired bathing temperature.

EVOLUTION™ 6' X 36"

Comfortable bathing design with form- tted

backrest and molded-in armrests

❏ 7236V (specify color)

• Acrylic with  berglass reinforcement

• 2.0 HP self-draining pump/motor

• Ten  ow adjustable jets including:

- Two adjustable Comfort Jets™ Hi Flo

- Eight adjustable Comfort Jets™

• Three silent air volume controls

• Side-mounted On/Off control

• Deep Soak Over ow Drain for maximum

water depth

• Complete factory installed and tested

whirlpool system

• Self leveling feet

• Designed for undermount installation option

• Quick connect E-Z-Install™ heater system

(must order E-Z-Install™ heater separately)

❏ 7236VC (specify color)

• Same as above with the EverClean™

whirlpool system featuring Antimicrobial

AlphaSan

❏ 7236VAC EverClean™ Air Spa

• Features Antimicrobial AlphaSan

• 1.25 HP single speed pump/motor

• Eight Comfort Air Jet system

• Side-mounted air switch On/Off

• Quick connect E-Z-Install™ heater system

(must order E-Z-Install™ heater separately)

❏ 7236VA Air Spa

• Same as 7236VAC without Antimicrobial

AlphaSan

Nominal Dimensions:

72" x 36" x 21-1/4"

(1829 x 914 x 540mm)

Compliance Certi cations -

Meets or Exceeds the Following Speci cations:

• Underwriters Laboratories - Hydromassage

Bathtubs UL 1795

• ASME A112.19.7M for Whirlpool Appliances

• ANSI Z124.1 for Plastic Bathtubs

• ASTM E162 for Flammability

• NFPA 258 for Smoke Density

SEE REVERSE FOR ROUGHING-IN DIMENSIONS

AND PRODUCT SPECIFICATIONS

* See American Standard Faucet Selector

Summary of content (2 pages)

PAGE 1
EVOLUTION™ 6' X 36" BY AMERICAN STANDARD HIGH GLOSS ACRYLIC EVOLUTION™ 6' X 36" Comfortable bathing design with form-fitted backrest and molded-in armrests ❏ 7236V (specify color) • Acrylic with fiberglass reinforcement • 2.
PAGE 2
EVOLUTION™ 6' X 36" BY AMERICAN STANDARD HIGH GLOSS ACRYLIC 72" (1829mm) 11" (279mm) 3-1/4" (83mm) 7-3/4" (197mm) 3" (76mm) 13-3/4" (349mm) 36" (914mm) 6" (152mm) CUT OUT IN FLOOR FOR DRAIN 36" (914mm) C/L OF OVERFLOW 21-1/2"(H) (546mm) 20-1/8"(A) (511mm) 20"(C) (508mm) DIMENSIONS OF FIXTURES ARE NOMINAL AND MAY VARY WITHIN THE RANGE OF TOLERANCES ESTABLISHED BY ANSI STANDARDS Z124.1 AND A112.19.7. GENERAL SPECIFICATIONS FOR 7236V WHIRLPOOL INSTALLED SIZE 72 x 36 x 21-1/2 In.