Installation Guide

Exposed Wall Mount

Sink Faucet and Gooseneck Spout

ROUGHING-IN DIMENSIONS

M 9 6 8 2 6 4 R E V. 1.4

Certiﬁed to comply with ANSI A112.18.1M

7293.152

7293.252

7293.252F15

171mm (6-3/4")

229mm (9")

FINISHED WALL

203mm (8")

70mm to 83mm

(2-3/4 to 3-1/4")

1/2" NPT

(FEMALE)

60mm Dia.

(2-3/8")

3mm (1/8")

ECCENTRIC

ROUGH-IN

Prepare water supply lines per "Roughing-in

Dimensions". Install 1/2" NPT. SUPPLY NIPPLES

1/2" NPT.

FEMALE

THREADS

FINISHED

WALL

1/2" NPT.

SUPPLY NIPPLE

1/2" to 1"

1-1/4" DIA.

OPENING

Installation

Instructions

Plumbers' Putty or Caulking

Adjustable Wrench

Phillips Screwdriver

Channel Locks

TOOLS REQUIRED

Thank you for selecting American-Standard...

the benchmark of ﬁne quality for over 100 years.

To ensure that your installation proceeds smoothly--

please read these instructions carefully before you begin.

PAGE 1
Installation Instructions Exposed Wall Mount Sink Faucet and Gooseneck Spout 7293.152 7293.252 7293.252F15 Thank you for selecting American-Standard... the benchmark of fine quality for over 100 years. To ensure that your installation proceeds smoothly-please read these instructions carefully before you begin. Certified to comply with ANSI A112.18.1M M 9 6 8 2 6 4 R E V. 1.
PAGE 2
FINISH INSTALLATION Apply thread sealant or teflon tape to SUPPLY NIPPLES (1). Slide COUPLING NUTS (2) onto INLET SHANKS (3). Thread ESCUTCHEONS (4) fully onto INLET SHANKS (3). Thread INLET SHANKS (3) onto SUPPLY NIPPLES (1). Distance between INLET SHANK (3) outlets must be 8" to match the VALVE (5). Insert RUBBER WASHERS (6) into INLET SHANK (3). Attach VALVE (5) to INLET SHANKS (3). Tighten both COUPLING NUTS (2) firmly. 8" 3 1 4 2 13/32" 6 3 5 TEST FAUCET Remove AERATOR (1).
PAGE 3
Exposed Wall Mount Sink Faucet with Gooseneck Spout MODEL NUMBER 7293.152 7293.252 7293.252F15 012182-002220A (2.2 GPM) SPOUT 012182-002150A (1.5 GPM) SPOUT 012245-0020A METAL HANDLE 012254-0020A HANDLE SCREW 066111-002220A (2.2 GPM) AERATOR 066111-002150A (1.