Specification Sheet

C19
© 2010 AS America Inc.
PORTSMOUTH
SINGLE CONTROL LAVATORY FAUCET
WITH BRASS TRADITIONAL SPOUT
GENERAL DESCRIPTION:
Cast brass body with metal lever handle. Washerless 28mm
ceramic disc valve cartridge. Braided flexible supply hoses
with 3/8" compression connectors. 20 inch (500mm) long
flexible stainless steel drain cable is pre-assembled to spout.
Metal Speed Connect
®
drain body with 1-1/4 inch (32mm)
tail piece. 1.5 gpm/5.7L/min. maximum flow rate.
PRODUCT FEATURES:
Brass Constructiion: Durable. Easy to clean. Ideal for
prolonged contact with water.
Ceramic Disc Valve Cartridge: Assures a lifetime of
smooth handle operation and drip-free performance.
Lead Free:
Faucet contains 0.25% total lead content by
weighted average.
Exclusive Speed Connect Metal Drain:
• Fewer parts. Installs in less time.
• No adjustments required - seals the first time, every time.
Flexible stainless steel cable - installs effortlessly in tight spaces.
Choice of Finishes: Wide range of durable finishes.
MODEL NUMBER:
7415.101 Single Control Lavatory
Metal Speed Connect
®
Pop-up drain.
Metal Lever Handles.
SUGGESTED SPECIFICATION:
Single control lavatory faucet shall feature a cast brass spout and metal lever handle. Shall also feature washerless ceramic
disc valve cartridge. Shall also feature a metal drain body with stainless steel cable actuation. Fitting shall be American
Standard Model # 7415.101.___.
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ANSI A117.1
ASME A112.18.1
CSA B 125.1
NSF 61/Section 9 and Annex G
7415.101
Product
Number
Description
Portsmouth single control lavatory faucet.Metal Speed Connect
®
Pop-up drain.
Finish Options
PVD
Blackened
Bronze
068
Oil
Rubbed
Bronze
224
PVD
Satin
Nickel
295
Polished
Chrome
002
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
FLOW RATE*
GALLONS PER MINUTE
I N L E T P R E S S U R E ( P S I )
*Flow rates shown are for mixed hot and cold.
0.0
0.5
1.0
1.5
2.0
10080604020
1-1/4"
(32mm)DIA.
MOUNTING
HOLES
3-5/8"
(92mm)
5-1/4"
(133mm)
7-1/8"
(181mm)
5"
(128mm)
1-1/4" O.D.
(32mm)
7-5/8"
(194mm)
5-1/2"
(140mm)
2-1/8" D.
(54mm)
*WaterSense approval pending
517mm
(20-3/8")
REF.
*

Summary of content (2 pages)