Specification

ManualsBrandsAmerican Standard ManualsBathMarquette 1-Handle 1-Spray Tub and Shower Faucet in Polished Chrome

HD-133

MARQUETTE

™

ANTI-SCALD PRESSURE BALANCE TUB & SHOWER SET

PRODUCT FEATURES:

Solid Brass Construction: Durable, ideal material for

prolonged contact with water.

Ceramic Disc Valve Cartridge: Assures a lifetime of

smooth handle operation and drip-free performance.

Pressure Balancing Valve: Maintains output

temperature in response to changes in relative hot and

cold supply pressure. Diaphragm system engineered to

eliminate cross flow and spool "thumping". Avoids failure

due to mineral deposits - ideal for use with hard water.

Adjustable Hot Limit Safety Stop: Limits the

amount of hot water allowed to mix with cold. Reduces

the risk of accidental scalding.

Integral Plaster Guard and Mounting Plate:

Plaster guard designed to protect valve during installation

and to serve as a mounting plate for thin wall installations.

Lifetime Warranty on Function and Finish.

GENERAL DESCRIPTION:

Cast brass valve body. Washerless 47mm ceramic disc

valve cartridge with temperature control. Hot limit safety

stop. Pressure balancing cartridge maintains constant

output temperature in response to changes in relative hot

and cold supply pressures. 1/2" female I.P.S. inlets/outlets.

Easy clean showerhead has 2.0gpm/ 7.6L/min. flow

restrictor. Metal lever handle. Rough-in plaster guard

designed for use as thin-wall mounting adaptor. I.P.S.

diverter tub spout.

MODEL NUMBER:

7761 Pressure Balance Tub and Shower Set

Easy Clean showerhead. I.P.S. diverter tub spout.

Polished Chrome finish.

SUGGESTED SPECIFICATION:

Bath/shower fitting shall be cast brass construction. Easy clean showerhead and I.P.S. diverter tub spout. Fitting shall be

equipped with pressure balancing cartridge engineered to eliminate cross flow and avoid failure due to mineral deposits.

Fitting shall be equipped with a pressure balancing mechanism and hot limit safety stop. Fitting shall be American Standard

Model # 7761.

Finished Wall

7-5/8"

(194mm) Dia.

Threaded Inlets

1-5/8" to 3-1/4"

(41 to 83mm)

1/2" (13mm) I.P.S.

Optional to Finished

Floor Uusually

Between 65" and 78"

(1651 and 1981mm)

74" (188cm)

For Head Clearance

"See Illustration"

18" (457mm)

Optional

Bottom of Tub

(102mm)

1/2"

(13mm) NPT

1/2" (13mm)

NPT Inlets

1/2" (13mm) NPT

Tub Port

3-3/8" (86mm)

NPT Inlets

1/2" (13mm)

NPT Shower

3-3/8" (86mm

Inlets

4-7/8" REF.

(125mm) REF.

8-1/2" REF. (216mm)

SHR

TUB

4-3/8" (111mm)

Top of Tub Rim

5-3/8" (137mm) Ref.

Revised 8/12

Summary of content (2 pages)

PAGE 1
MARQUETTE™ ANTI-SCALD PRESSURE BALANCE TUB & SHOWER SET MODEL NUMBER: 7761 Pressure Balance Tub and Shower Set Easy Clean showerhead. I.P.S. diverter tub spout. Polished Chrome finish. H OFF 1-5/8" to 3-1/4" (41 to 83mm) Finished Wall C 1/2" (13mm) I.P.S. 4-7/8" REF.(125mm) REF. Optional to Finished Floor Uusually Between 65" and 78" (1651 and 1981mm) GENERAL DESCRIPTION: 8-1/2" REF. (216mm) Cast brass valve body. Washerless 47mm ceramic disc valve cartridge with temperature control.
PAGE 2
MARQUETTE™ ANTI-SCALD PRESSURE BALANCE TUB & SHOWER SET CODES AND STANDARDS FLOW RATE* Spout Shower 8 GALLONS PER MINUTE These products meet or exceed the following codes and standards: ANSI A117.1 ASME A112.18.1 CSA B 125 ASSE 1016 6 4 2 0 20 40 60 80 100 INLET PRESSURE (PSI) *Flow rates shown are for mixed hot and cold. Product Number 7761 Description Pressure balance tub/shower. Female I.P.S. inlets/outlets. Easy clean showerhead. I.P.S. diverter tub spout. Polished Chrome finish.