Manualshelf

Installation & Assembly

ManualsBrandsAmerican Standard ManualsFarmhouse Kitchen SinksDelancey Farmhouse Apron Front Cast Iron 33 in. 4-Hole Double Bowl Kitchen Sink in Brilliant White
12345
- 3 -
740210-100 (9/18)
4
3
SINK INSTALLATION
PLACE A THIN LAYER OF SEALANT AROUND
TOP EDGE OF SUPPORT FRAME
Installing Countertop - Under Mount Installation
ACTUAL SINK
DIMENSIONS
COUNTERTOP
CUTOUT DIMENSION
COUNTERTOP
CUTOUT
DIMENSION
CABINET OPENING DIMENSION
STEP 1. Carefully set the sink within the support frame and position in center of cabinet opening. Ensure that the
sink top rim is level and flush with cabinet top surface. Check clearance around sink apron and ensure sink is
centered within cabinet opening. Ensure sink base is making proper contact with support frame. Adjust or shim as
needed to obtain proper sink position and fit. (Reference Under Mount Diagram A)
STEP 2. Carefully remove sink and place a thin layer of sealant around top edge of support frame where the sink
and frame will make contact. Then replace sink back into position. See diagram below.
Under mount countertop cutout opening is determined by sink opening. Faucet holes to align with sinks faucet
hole centers. Carefully cut out the countertop opening, opening must be adequately finished and sealed to
prevent damage from water absorption.
Note: Physically verify dimensions of the sink being installed to use as a reference.
CAUTION: Sink is heavy. For personal safety, use extra person for assistance with installation.