Installation Sheet

2
5
3
4
M965368 REV. 1.2 (12/14)
TOWEL RING and ROBE HOOK INSTALLATION
2
INSTALL TOILET PAPER HOLDER
3
LEVEL
C
L
2
3
4
3
4
1
1
FINISHED WALL
2
1
2
3
4
5
3
4
Refer to Step 1 for installation of MOUNTING BRACKETS (1). NOTE: The center line distance between the two
MOUNTING BRACKETS is 6"(154mm). Make sure the two MOUNTING BRACKETS (1) are level.
Install the ACCESSORY ESCUTCHEONS (2) on the MOUNTING BRACKETS (1). Make sure the ACCESSORY ESCUTCHEONS (2) with
holes for the horizontal shaft are facing inward. Secure ACCESSORY ESCUTCHEONS (2) with SET SCREW (3) using a 4mm HEX WRENCH (4).
Install the PAPER HOLDER SHAFT (5) into the mounted ACCESSORY ESCUTCHEONS (2).
3
4
1
FINISHED WALL
2
6" (154mm)
Refer to Step 1 for installation of MOUNTING BRACKETS (2). Align accessory and place ACCESSORY ESCUTCHEON (1) onto
MOUNTING BRACKET (2). Secure accessory with SET SCREW (3) using a 4mm HEX WRENCH (4).