Installation Guide

770014-100
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2008
ASSEMBLY & INSTALLATION
INSTRUCTIONS
STUDIO MIRROR 9205.101.339
STUDIO MEDICINE CABINET 9205.300.339
STUDIO DEMI-APOTHECARY CABINET 9205.200.339
- 1 -
Recommended Tools & Materials
Roughing-in Dimensions
Phillips Screwdriver Regular Screwdriver
Drill
10'
Tape Measure
Level
Hammer
BACK VIEWSIDE VIEW
STUDIO MIRROR 9205.101.339
NOTE: Where possible, try to affix to a stud or provide adequate wall
support for the size and weight of the mirror.
Pre-drill holes in wall for Plastic Anchors [use when no stud is available]
to the required “D” measurement and desired height from the floor.
Insert Plastic Anchors provided into the pre-drilled holes and thread the screw
hardware into the Plastic Anchor using a proper screwdriver. Allow the head
to protrude from the Plastic Anchor adequate to fit into the Key Hole Slots at
back of Mirror.
Mount the Mirror (in Left Hand or Right Hand position) to the wall by
fitting the Key Hole Slots onto the protruding screw head.
INSTALLATION
Roughing-in Dimensions
STUDIO MEDICINE CABINET 9205.300.339
NOTE: Where possible, try to affix to a stud or provide adequate wall
support for the size and weight of the mirror.
Medicine Cabinet comes with pre-drilled holes on the back of the cabinet.
Affix the Medicine Cabinet to the wall in the desired location by pre-drilling
the wall and then inserting the Plastic Anchors provided (use when no stud
is available).
Secure the Medicine Cabinet to wall by inserting screw hardware through
back panel of Medicine Cabinet into the Plastic Anchor.
Tighten screws to secure Medicine Cabinet to wall.
INSTALLATION
STUDIO DEMI-APOTHECARY CABINET 9205.200.339
Roughing-in Dimensions
INSTALLATION
FRONT VIEW
Left Hand Position
of Mirror Shown
FRONT VIEW SIDE VIEW
FRONT VIEW SIDE VIEW
Left Hand Position
of Cabinet Shown
Measure distance “D” between Key Hole Slots.
Key Hole Slot
for Mounting
Mirror Left
Hand Position
Key Hole Slot
for Mounting
Mirror Right
Hand Position
Mirror
Mirror
Holes at
back of
Cabinet for
wall mount
Glass Shelf
Door opens to access
Gallery / Storage Rail
Thank you for selecting our products...products which have been the benchmarks of fine quality for over 100 years.
To help insure that the installation process will proceed smoothly, please read these instructions carefully before you begin.
Also, review the recommended tools and materials list; carefully unpack and examine your new plumbing fixture.
To maintain the beauty of the finish, avoid placing the furniture in direct sunlight, as sunlight causes fading. Also avoid
extreme changes in temperature by arranging furniture away from radiators, heat and air vents, and air conditioning units.
Avoid placing furniture directly under windows.
Measure “D”
1-1/4"
(32mm)
8"
(203mm)
4"
(102mm)
6-1/4"
(159mm)
28"
(71mm)
32"
(813mm)
40"
(1016mm)
22"
(559mm)
24"
(610mm)
19-1/4"
(489mm)
15"
(381mm)
11-1/2"
(292mm)
Move the Demi-Apothecary into desired location and
level with the adjustable glides on the bottom of the
feet. The glides can be adjusted outward up to 1" but
it is recommended not to exceed 1/2" if possible.
Ensure glass shelf is inserted securely into side
support slots of cabinet.