Specification

B93
© 2015 AS America Inc.
MODEL NUMBER:
TRIM KITS:
T375.120 Colony BATH/SHOWER Trim Kit
Lever Handle. LESS Valve Body.
T375.240 Colony BATH/SHOWER Trim Kit
Metal Lever Handle. LESS Valve Body.
T372.120 Colony SHOWER ONLY Trim Kit
Lever Handle. LESS Valve Body.
T372.240 Colony SHOWER ONLY Trim Kit
Metal Lever Handle. LESS Valve Body.
T371.120 Colony VALVE ONLY Trim Kit
Lever Handle. LESS Valve Body.
T371.240 Colony VALVE ONLY Trim Kit
Metal Lever Handle. LESS Valve Body.
For use with R110 Series Pressure Balance Valves.
See reverse side for available Rough Valves.
T375.120 Bath/Shower Trim Shown
T375.120 Bath/Shower Trim Kit. Lever Handle. LESS Valve Body.
T375.240
T372.120
T372.240
T371.120
T371.240
Shower Only Trim Kit. Lever Handle. LESS Valve Body.
Valve Only Trim Kit. Lever Handle. L
ESS Valve Body.
Finish Options
Product
Number
Description
Bath/Shower Trim Kit. Metal Lever Handle. LESS Valve Body.
Shower Only Trim Kit. Metal Lever Handle. L
ESS Valve Body.
Valve Only Trim Kit. Metal Lever Handle. L
ESS Valve Body.
Polished
Chrome
002
TRIM KITS *
* TRIM & ROUGH MUST BE ORDERED SEPARATELY.
FLOW RATE*
GALLONS PER MINUTE
INLET PRESSURE (PSI)
*Flow rates shown are for mixed hot and cold.
0
2
4
6
8
Spout
Shower
10080604020
FINISHED
WALL
TOP OF TUB RIM
BOTTOM OF TUB
6"
(152 mm)
6-3/4"
(171 mm)
1/2" COPPER
GENERAL DESCRIPTION:
SHOWERHEAD
Single function showerhead at maximum 2.5 gpm/9.5 L/min.
flow rate.
WALL TUB SPOUT
Metal slip-on diverter spout.
WALL VALVE TRIM
Available with lever or metal lever handle.
Plastic wall escutcheon.
SUGGESTED SPECIFICATION:
Bath/shower fitting shall feature single function showerhead with Max. 2.5 gpm/9.5 L/min. flow rate. Fitting shall be:
American Standard - Trim Kit Model # T375.___.___, Model # T372.___.___, Model # T371.___.___ and Valve Body Model # R11_.
18"
(457 mm)
OPTIONAL
4" REF.
(102 mm)
7" REF.
(178 mm)
1-1/2" REF.
(38 mm)
5-1/2" REF.
(140 mm)
5-1/2" REF.
(140 mm)
4"
(102 mm)
1-5/8" TO 3-1/4"
(41 mm TO 83 mm.)
74
"
(1880 mm)
FOR HEAD
CLEARANCE
1-1/4"(32 mm)
DIA HOLE
4-3/4"
(121 mm)
REF.
4" (100 mm) REF.
1/2" NPT
(13 mm)
CODES AND STANDARDS
These products meet or exceed the
following codes and standards:
ANSI A 117.1
ASSE 1016
ASME A112.18.1
CSA B 125.1
IPS Spout
Factory
Installed
Decal Ring
(Red/Blue)
___IPT
___WD
Modifications
Parts
Suffix*
*To modify a product, add suffix after the
4
th
digit (ex. T064ITP502.002)
C
H
O
F
F
O
N
R111
R111SS
R110
R110SS
R115
R115SS
R117
R117SS
R118
R118SS
R119
R119SS
Rough Valve Body less trim. Universal inlets/outlets.
Rough Valve Body less trim. Universal inlets/outlets with Screwdriver Stops.
Rough Valve Body less trim. Direct sweat inlets/outlets.
Rough Valve Body less trim. Direct sweat inlets/outlets with Screwdriver Stops.
Rough Valve Body less trim. Female Thread inlets/outlets.
Rough Valve Body less trim. Female Thread inlets/outlets with Screwdriver Stops.
Rough Valve Body less trim. PEX inlets/universal outlets for Crimp Ring PEX system (ASTM F1807).
Rough Valve Body less trim. PEX inlets/universal outlets for Crimp Ring PEX system (ASTM F1807)
with Screwdriver Stops.
Rough Valve Body less trim. PEX inlets/universal outlets for Cold Expansion PEX system (ASTM F1960).
Rough Valve Body less trim. PEX inlets/universal outlets for Cold Expansion PEX system (ASTM F1960)
with Screwdriver Stops.
Rough Valve Body less trim. CPVC inlets/universal outlets.
Rough Valve Body less trim. CPVC inlets/universal outlets with Screwdriver Stops.
Product
Number
Description
ROUGH VALVE BODIES
Meets the American Disabilities Act Guidelines and ANSI A117.1
Requirements for the physically challenged.
Revised 5/15
COLONY
®
PRESSURE BALANCE BATH/SHOWER FITTING