Specification Sheet

B21
© 2008 AS America Inc.
COLONY SOFT
PRESSURE BALANCE BATH/SHOWER FITTING
WITH FloWise
®
SHOWERHEAD
MODEL NUMBER:
TRIM KITS:
T675.508 Colony Soft BATH/SHOWER Trim Kit
Metal Lever Handle. FloWise Showerhead. LESS Valve Body.
T675.507 Colony Soft SHOWER ONLY Trim Kit
Metal Lever Handle. FloWise Showerhead. LESS Valve Body.
ROUGH VALVES:
R120 Pressure Balance Rough Valve Body only
Direct sweat inlets/outlets. LESS trim.
R120SS Pressure Balance Rough Valve Body only
with Screwdriver stops
Direct sweat inlets/outlets. Screwdriver stops. LESS trim.
R125 Pressure Balance Rough Valve Body only
Female thread inlets/outlets. LESS trim.
R125SS Pressure Balance Rough Valve Body only
with Screwdriver stops
Female thread inlets/outlets. Screwdriver stops. LESS trim.
R127 Pressure Balance Rough Valve Body only
PEX inlets/Direct sweat outlets. LESS trim.
R127SS Pressure Balance Rough Valve Body only
with Screwdriver stops
PEX inlets/Direct sweat outlets. Screwdriver stops. LESS trim.
PRODUCT FEATURES:
Flowise Water Saving Showerhead: Saves up to 40%
in water usage. Max. 1.5gpm/5.7L/min. flow rate.
Cast Brass Valve Body: Durable - Quality that will last a
lifetime. Ideal material for prolonged contact with water.
Ceramic Disc Valve Cartridge: Assures a lifetime of
drip-free performance. Allows easy control over both water
temperature and volume.
Pressure Balancing Valve Cartridge: Maintains constant
output temperature in response to changes in relative hot and
cold supply pressure. Diaphragm system engineered to
eliminate cross flow. Avoids failure due to mineral deposits -
ideal for use in hard water.
Adjustable Hot Limit Safety Stop: Limits the amount of
hot water allowed to mix with cold. Reduces the risk of
accidental scalding.
Exclusive Plaster Guard: Plaster guard is designed to
protect valve during installation and serve as a mounting plate
for thin-wall installations. Two piece design allows valve to be
tested prior to trim installation.
Wide Rough-in Range: From 1-5/8" to 3-1/4".
SUGGESTED SPECIFICATION:
Bath/shower fitting shall feature water saving showerhead with Max. 1.5gpm/5.7L/min. flow rate. Shall feature a cast brass valve body.
Shall feature ceramic disc valve cartridge which allows user to control both water temperature and volume. Fitting shall be equipped with
pressure balancing cartridge engineered to eliminate cross flow and avoid failure due to mineral deposits. Shall also feature a hot limit
safety stop. Fitting shall be: Rough Valve Body - American Standard Model # R12____, Trim Kit - American Standard Model #
T675.50_.____.
T675.508 Bath/Shower Trim Shown
SHR.
1/2" NOM.
COPPER
SWEAT
TUB 1/2" NOM.
COPPER SWEAT
THREADED (STOPS) (R125SS)
86 mm
(3-3/8")
INLETS 1/2" NPT
149 mm
(5-7/8")
THREADED (R125)
INLETS
86 mm
(3-3/8")
INLETS
1/2" NPT
86 mm
(3-3/8")
SHR
1/2" NPT
TUB PORT
1/2" NPT
INLETS
103 mm
(4-1/16")
103 mm
(4-1/16")
INLETS 1/2" NOM.
COPPER SWEAT
SHR. 1/2" NOM.
COPPER SWEAT
TUB 1/2" NOM.
COPPER SWEAT
51.5 mm
(2-1/32")
51 mm
(2")
SHR. 1/2" NOM.
COPPER SWEAT
TUB 1/2" NOM.
COPPER SWEAT
SWEAT (STOPS) (R120SS)
SWEAT (R120)
103 mm
(4-1/16")
INLETS
1/2" NPT
149 mm
(5-7/8")
VALVE BODY OPTIONS
• Showerhead with 1.5gpm/5.7L.min. flow restrictor.
CODES AND STANDARDS
These products meet or exceed the
following codes and standards:
ANSI A 117.1
ASSE 1016
ASME A112.18.1
CSA B 125
FLOW RATE*
GALLONS PER MINUTE
I N L E T P R E S S U R E ( P S I )
*Flow rates shown are for mixed hot and cold.
0
2
4
6
8
Spout
10080604020
SHR.
1/2" NOM.
COPPER
SWEAT
TUB 1/2" NOM.
COPPER SWEAT
PEX (STOPS) (R127SS)
52 mm
(2-1/32")
104 mm
(4-1/16")
1/2" PEX INLETS
(ASTM F1807)
165mm
(6-1/2")
SHR.
1/2" NOM.
COPPER
SWEAT
TUB 1/2" NOM.
COPPER SWEAT
PEX (R127)
52 mm
(2-1/32")
104 mm
(4-1/16")
1/2" PEX INLETS
(ASTM F1807)
109mm
(4-1/4")
T675.508 Bath/Shower Trim Kit. Metal Lever Handle. FloWise Showerhead. LESS Valve Body.
T675.507 Shower Only Trim Kit. Metal Lever Handle. FloWise Showerhead. LESS Valve Body.
Finish Options
Product
Number
Description
Polished
Chrome
002
PVD
Satin
Nickel
295
R120
R120SS
Rough Valve Body less trim. Direct Sweat inlets/outlets.
Rough Valve Body less trim. Direct Sweat inlets/outlets with Screwdriver Stops.
R125
R125SS
Rough Valve Body less trim. Female Thread inlets/outlets.
Rough Valve Body less trim. Female Thread inlets/outlets with Screwdriver Stops.
R127
R127SS
Rough Valve Body less trim. PEX inlets/ Direct Sweat outlets.
Rough Valve Body less trim. PEX inlets/ Direct Sweat outlets with Screwdriver Stops.
TRIM KITS *
Product
Number
Description
ROUGH VALVE BODIES
* TRIM & ROUGH MUST BE ORDERED SEPARATELY.
1-1/2 REF.
(38mm)
18"
(457mm)
optional
7" REF.
(178mm)
FINISHED WALL
BOTTOM OF TUB
74" FOR HEAD
CLEARANCE
(188cm)
4" REF.
(102mm)
5-1/8" REF.
(130mm)
TOP OF TUB RIM
4" REF.
(102 mm)
1-5/8" TO 3-1/4"
(41mm - 83mm.)
6" D.
(153mm)
3"
(76mm)
Meets the American Disabilities
Act Guidelines and ANSI
A117.1 Requirements for the
physically challenged.
GENERAL DESCRIPTION:
TRIM KIT
FloWise water saving showerhead offers 40% water
savings at maximum 1.5gpm/5.7L/min. flow rate. Slip-on
diverter spout. Available with metal lever handle. Available
in Bath/Shower and Shower Only combinations.
ROUGH VALVE BODY
Cast brass body, washerless ceramic disc valve cartridge
with back to back capability, and hot limit safety stop.
Cycles from “off” to “cold” to “hot”. Pressure balancing
cartridge maintains constant output temperature in
response to changes in relative hot and cold supply
pressure. 1/2" inlets and outlets (choice of direct sweat,
threaded, or PEX). Available with screwdriver stops.
Rough-in plaster guard designed for use as thin-wall
mounting adaptor.