Specification Sheet

5/17

EDGEMERE

PRESSURE BALANCE BATH/SHOWER FITTING

OFF

MODEL NUMBER:

TRIM KITS:

❏ T018.502 Edgemere BATH/SHOWER Trim Kit (2.5 gpm)

Metal lever handle. LESS valve body.

❏ T018.501 Edgemere Shower ONLY Trim Kit (2.5 gpm)

Metal lever handle. LESS valve body.

❏ T018.500 Edgemere Valve Trim ONLY

Metal lever handle. LESS valve body.

SUGGESTED SPECIFICATION

Bath/shower tting shall feature 5-3/4" -single function showerhead with Max. 2.5 gpm/9.5 L/min. ow rate. Fitting shall be:

American Standard - Trim Kit Model # T186.50_.___ and Valve Body Model # R11_.

GENERAL DESCRIPTION:

SHOWERHEAD

5-3/4" Single function showerhead at maximum

2.5 gpm/9.5 L/min.

WALL TUB SPOUT

Metal slip-on diverter spout.

WALL VALVE TRIM

Available with metal lever handle.

Brass wall escutcheon.

T018.502 Bath/Shower Trim Shown

7-11/16" (195 mm)

1-5/8" to 3-1/4"

1/2" (13 mm) I.P.S.

FINISHED FLOOR USUALLY

BETWEEN 65" AND 78"

(1651 AND 1981MM)

FINISHED WALL

18" (457 mm)

OPTIONAL

4-1/8" (108 mm)

TOP OF TUB RIM

*5-1/8" (130 mm) Ref.

4" (102 mm)

1/2" NPT

PAGE 1
EDGEMERE® PRESSURE BALANCE BATH/SHOWER FITTING MODEL NUMBER: TRIM KITS: ❏ T018.502 Edgemere BATH/SHOWER Trim Kit (2.5 gpm) Metal lever handle. LESS valve body. ❏ T018.501 Edgemere Shower ONLY Trim Kit (2.5 gpm) Metal lever handle. LESS valve body. ❏ T018.500 Edgemere Valve Trim ONLY H OFF Metal lever handle. LESS valve body. C 1-5/8" to 3-1/4" 1/2" (13 mm) I.P.S. T018.
PAGE 2
EDGEMERE® PRESSURE BALANCE BATH/SHOWER FITTING CODES AND STANDARDS ANSI A117.1 ASME A112.18.1 / CSA B125.1 ASSE 1016 FLOW RATE* GALLONS PER MINUTE These products meet or exceed the following codes and standards: Spout Shower 8 6 4 2 0 20 40 60 80 100 INLET PRESSURE (PSI) *Flow rates shown are for mixed hot and cold. ROUGH VALVE BODIES TRIM KITS * * TRIM & ROUGH MUST BE ORDERED SEPARATELY. Product Number Description T018.502 Edgemere Bath/Shower Trim Kit (2.5 gpm) Metal lever handle.