Specification

4/17

EDGEMERE

PRESSURE BALANCE BATH/SHOWER FITTING

OFF

MODEL NUMBER:

TRIM KITS:

❏ T018.508 Edgemere BATH/SHOWER Trim Kit (1.8 gpm)

Metal lever handle. LESS valve body.

❏ T018.507 Edgemere Shower ONLY Trim Kit (1.8 gpm)

Metal lever handle. LESS valve body.

SUGGESTED SPECIFICATION

Bath/shower tting shall feature 5-3/4" -single function showerhead with Max. 1.8 gpm/6.8 L/min. ow rate. Fitting shall be:

American Standard - Trim Kit Model # T186.50_.___ and Valve Body Model # R11_.

GENERAL DESCRIPTION:

SHOWERHEAD

5-3/4" Single function showerhead at maximum

1.8 gpm/6.8 L/min ow rate.

WALL TUB SPOUT

Metal slip-on diverter spout.

WALL VALVE TRIM

Available with metal lever handle.

Brass wall escutcheon.

T018.508 Bath/Shower Trim Shown

7-11/16" (195 mm)

1-5/8" to 3-1/4"

1/2" (13 mm) I.P.S.

FINISHED FLOOR USUALLY

BETWEEN 65" AND 78"

(1651 AND 1981MM)

FINISHED WALL

18" (457 mm)

OPTIONAL

4-1/8" (108 mm)

TOP OF TUB RIM

*5-1/8" (130 mm) Ref.

4" (102 mm)

1/2" NPT

PAGE 1
EDGEMERE® PRESSURE BALANCE BATH/SHOWER FITTING MODEL NUMBER: TRIM KITS: ❏ T018.508 Edgemere BATH/SHOWER Trim Kit (1.8 gpm) Metal lever handle. LESS valve body. ❏ T018.507 Edgemere Shower ONLY Trim Kit (1.8 gpm) Metal lever handle. LESS valve body. H OFF C 1-5/8" to 3-1/4" 1/2" (13 mm) I.P.S. T018.508 Bath/Shower Trim Shown FINISHED FLOOR USUALLY BETWEEN 65" AND 78" (1651 AND 1981MM) GENERAL DESCRIPTION: SHOWERHEAD 5-3/4" Single function showerhead at maximum 1.8 gpm/6.8 L/min flow rate.
PAGE 2
EDGEMERE® PRESSURE BALANCE BATH/SHOWER FITTING CODES AND STANDARDS ANSI A117.1 ASME A112.18.1 / CSA B125.1 ASSE 1016 FLOW RATE GALLONS PER MINUTE These products meet or exceed the following codes and standards: 1.8 1.7 1.6 1.5 0 20 40 60 80 INLET PRESSURE (PSI) ROUGH VALVE BODIES TRIM KITS * * TRIM & ROUGH MUST BE ORDERED SEPARATELY. Product Number Finish Options Polished Chrome Legacy Bronze Brushed Nickel 002 278 295 Description T018.508 Edgemere Bath/Shower Trim Kit (1.