Dimensions Guide

ManualsBrandsAmerican Standard ManualsBathtub FaucetsTownsend Polished Chrome 2-Handle Commercial/Residential Deck Mount Roman Bathtub Faucet with Hand Shower

- 1 -

Product names listed herein are trademarks of AS America, Inc.

Thank you for selecting American Standard...

the benchmark of ﬁne quality for over 140 years.

To ensure that your installation proceeds smoothly-please read

these instructions carefully before you begin.

RECOMMENDED TOOLS

INSTALL SPOUT

Townsend

Roman Tub Filler

INSTALLATION

INSTRUCTIONS

T353900

T353901

Certied to comply with ANSI A112.18.1M

CAUTION

Turn off hot and cold water

supplies before begining.

M965951 (8/18)

434 mm

(17")

280 mm

(11")

253 mm

(10")

116 mm

(5")

215 mm

(8-1/2")

198 mm

(8")

99 mm

(4")

102 mm

(4")

1" MAX.

(25 mm)

8" TO 16"

FLEXIBLE INSTALLTION

(203 TO 406 mm)

Adjustable Wrench

Channel Locks

Flat Blade Screwdriver

Phillips Screwdriver

Hex Wench

(supplied)

Hex wench

(supplied)

RECESS

MOUNTING

SURFACE

ROUGHING-IN

DIMENSIONS

• Apply 4-5 drops of THREADLOCKER (1)

on DIVERTER INSERT (2) threads (supplied).

NOTE: If installing on nished deck, install DIVERTER

INSERT (2) through WASHER (7).

• Thread DIVERTER INSERT (2) carefully until it touches the

installation surface, be sure the RUBBER RING (5)

is properly seated in it’s RECESS at the base of the

SPOUT (3).

• Thread SET SCREW (4) using 5 mm hex wrench supplied.

Make certain SET SCREW (4) is properly aligned and tight

so that SPOUT (3) is locked in place.

• Install PLUG BUTTON (6).

Summary of content (4 pages)

PAGE 1
INSTALLATION INSTRUCTIONS T353900 T353901 Townsend® Roman Tub Filler Thank you for selecting American Standard... the benchmark of fine quality for over 140 years. To ensure that your installation proceeds smoothly-please read these instructions carefully before you begin. Certified to comply with ANSI A112.18.
PAGE 2
VALVE ASSEMBLY • Remove PLASTER GUARDS. • Thread INSERT (1) into SIDE VALVE (2) until it touches the installation surface. • Thread INSERT (3) into SIDE VALVE (4) until it touches the installation surface. • Tighten COUPLING (5) into TEE (6) for products without hand shower. 3 1 VALVE LOCKING FITTING MOUNTING DECK COLD VALVE LOCKING 4 SPOUT SHANK 6 5 HOT 2 3 INSTALL HANDLES • Turn VALVE to OFF position.
PAGE 3
4 HANDSHOWER INSTALLATION (FOR MODEL T35390X ONLY) • Drop SPRAY ESCUTCHEON (1) through the fourth hole of the tub ledge (12" max from SPOUT center) with SPRAY ESCUTCHEON (1) directed towards tub center. Be sure RUBBER RING (2) is properly seated in ESCUTCHEON (1). • Add SEAL WASHER (3) and connect HOSE (8) to outlet nipple at the bottom of TEE (5). Tighten firmly. • Slip SHOWER HOSE (6) with COUPLING NUT through SPRAY HOLDER (4) and ESCUTCHEON (1).
PAGE 4
Townsend® Roman Tub Filler MODEL NUMBER T353900 T353901 M970553-YYY0A TRANSFER KNOB KIT (T353.901) M970124-YYY0A BUTTON AND SCREW A922388-YYY0A STREAM STRAIGHTENER M911705-0070A RUBBER RING M970507-0070A TRANSFER ASSEMBLY (T353901) M970069-YYY0A LEVER HANDLE ASSEMBLY For T353901 Only 1660608.