Specification

B95
© 2015 AS America Inc.
COLONY
®
PRESSURE BALANCE BATH/SHOWER FITTING
WITH FloWise
®
SHOWERHEAD
MODEL NUMBER:
TRIM KITS:
T375.128 Colony BATH/SHOWER Trim Kit
Lever Handle. FloWise Showerhead.
L
ESS Valve Body.
T375.248 Colony BATH/SHOWER Trim Kit
Metal Lever Handle. FloWise Showerhead.
L
ESS Valve Body.
T372.128 Colony SHOWER ONLY Trim Kit
Lever Handle. FloWise Showerhead.
L
ESS Valve Body.
T372.248 Colony SHOWER ONLY Trim Kit
Metal Lever Handle. FloWise Showerhead.
L
ESS Valve Body.
For use with R110 Series Pressure Balance Valves.
See reverse side for available Rough Valves.
T375.128 Bath/Shower Trim Shown
T375.128 Bath/Shower Trim Kit. Lever Handle. FloWise Showerhead. LESS Valve Body.
T372.248 Shower Only Trim Kit. Metal Lever Handle. FloWise Showerhead. LESS Valve Body.
Finish Options
Product
Number
Description
T375.248 Bath/Shower Trim Kit. Metal Lever Handle. FloWise Showerhead. LESS Valve Body.
T372.128 Shower Only Trim Kit. Lever Handle. FloWise Showerhead. LESS Valve Body.
Polished
Chrome
002
TRIM KITS *
* TRIM & ROUGH MUST BE ORDERED SEPARATELY.
FINISHED
WALL
TOP OF
TUB RIM
BOTTOM
OF TUB
1-1/2"
(38 mm)
6"
(152 mm)
4" REF.
(102 mm)
Shower
FLOW RATE*
GALLONS PER MINUTE
INLET PRESSURE (PSI)
*Flow rates shown are for mixed hot and cold.
0
2
4
6
8
Spout
10080604020
1/2" COPPER
GENERAL DESCRIPTION:
SHOWERHEAD
FloWise water saving showerhead offers 40% water
savings at maximum 1.5 gpm/5.7 L/min. flow rate.
WALL TUB SPOUT
Metal slip-on diverter spout.
WALL VALVE TRIM
Available with lever or metal lever handle.
Plastic wall escutcheon.
SUGGESTED SPECIFICATION:
Bath/shower fitting shall feature water saving showerhead with Max. 1.5gpm/5.7L/min. flow rate. Fitting shall be: American Standard
Trim Kit Model # T375.___.___, Model # T372.___.___ and Valve Body Model # R11_.
6-3/4"
(171 mm)
18"
(457 mm)
OPTIONAL
4" REF.
(102 mm)
7" REF.
(178 mm)
5-1/2" REF.
(140 mm)
1-5/8" TO 3-1/4"
(41 mm TO 83 mm)
74
"
(1880 mm)
FOR HEAD
CLEARANCE
1-1/4"(32 mm)
DIA HOLE
4-3/4"
(121 mm)
REF.
4" (100 mm) REF.
1/2" NPT
(13 mm)
CODES AND STANDARDS
These products meet or exceed the
following codes and standards:
ASSE 1016
ASME A112.18.1
CSA B 125.1
IPS Spout
Factory
Installed
Decal Ring
(Red/Blue)
___IPT
___WD
Modifications
Parts
Suffix*
*To modify a product, add suffix after the
4
th
digit (ex. T064ITP502.002)
C
H
O
F
F
O
N
R111
R111SS
R110
R110SS
R115
R115SS
R117
R117SS
R118
R118SS
R119
R119SS
Rough Valve Body less trim. Universal inlets/outlets.
Rough Valve Body less trim. Universal inlets/outlets with Screwdriver Stops.
Rough Valve Body less trim. Direct sweat inlets/outlets.
Rough Valve Body less trim. Direct sweat inlets/outlets with Screwdriver Stops.
Rough Valve Body less trim. Female Thread inlets/outlets.
Rough Valve Body less trim. Female Thread inlets/outlets with Screwdriver Stops.
Rough Valve Body less trim. PEX inlets/universal outlets for Crimp Ring PEX system (ASTM F1807).
Rough Valve Body less trim. PEX inlets/universal outlets for Crimp Ring PEX system (ASTM F1807)
with Screwdriver Stops.
Rough Valve Body less trim. PEX inlets/universal outlets for Cold Expansion PEX system (ASTM F1960).
Rough Valve Body less trim. PEX inlets/universal outlets for Cold Expansion PEX system (ASTM F1960)
with Screwdriver Stops.
Rough Valve Body less trim. CPVC inlets/universal outlets.
Rough Valve Body less trim. CPVC inlets/universal outlets with Screwdriver Stops.
Product
Number
Description
ROUGH VALVE BODIES
Meets the American Disabilities Act Guidelines and ANSI A117.1
Requirements for the physically challenged.
Revised 5/15