Installation Guide

- 1 -
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2018
Thank you for selecting American Standard...
the benchmark of fine quality for over 140 years.
To ensure that your installation proceeds smoothly-please
read these instructions carefully before you begin.
RECOMMENDED TOOLS
ROUGHING-IN DIMENSIONS
1
INSTALL SPOUT
Portsmouth
™
Roman Tub Filler
INSTALLATION
INSTRUCTIONS
T420900
T420901
WITH HANDSHOWER
T420920
T420921
WITH HANDSHOWER
Certied to comply with ANSI A112.18.1M
CAUTION
Turn off hot and cold water
supplies before begining.
M965952 (8/18)
1" MAX.
(25 mm)
8" TO 16"
FLEXIBLE INSTALLTION
(203 TO 406 mm)
MOUNTING
SURFACE
2-1/4" D.
(56mm) D.
CROSS HANDLE
LEVER
HANDLE
7-7/8"
(199mm)
7-7/8"
(200mm)
4-7/8"
(125mm)
3-3/16"
(81mm)
2-7/8"
(73mm)
6-1/2" to 12"
(165mm to 305mm)
2-5/8" D.
(66mm) D.
2-1/16" D.
(52mm) D.
8-1/4"
(210mm)
Adjustable Wrench
Channel Locks
Flat Blade Screwdriver
Phillips Screwdriver
Hex Wench
(supplied)
Hex wench
(supplied)
3
4
6
RECESS
MOUNTING
SURFACE
1
5
2
7
• Apply 4-5 drops of THREADLOCKER (1)
on DIVERTER INSERT (2) threads (supplied).
NOTE: If installing on nished deck, install DIVERTER
INSERT (2) through WASHER (7).
• Thread DIVERTER INSERT (2) carefully until it touches the
installation surface, be sure the RUBBER RING (5)
is properly seated in it’s RECESS at the base of the
SPOUT (3).
• Thread SET SCREW (4) using 5 mm hex wrench supplied.
Make certain SET SCREW (4) is properly aligned and tight
so that SPOUT (3) is locked in place.
• Install PLUG BUTTON (6).