Manualshelf

Use and Care Guide

ManualsBrandsAmerican Standard ManualsBathtub & Shower FaucetsT430.502.002
12
B31
© 2013 AS America Inc.
BERWICK
®
PRESSURE BALANCE BATH/SHOWER FITTING
MODEL NUMBER:
TRIM KITS:
T430.502 Berwick BATH/SHOWER Trim Kit
Metal Lever Handle. L ESS Valve Body.
T430.501 Berwick BATH/SHOWER Trim Kit
Metal Lever Handle. L ESS Valve Body.
T430.500 Berwick VALVE ONLY Trim Kit
Metal Lever Handle. L ESS Valve Body.
ROUGH VALVES:
R110 Pressure Balance Rough Valve Body only
Direct sweat inlets/outlets. LESS trim.
R110SS Pressure Balance Rough Valve Body only
with Screwdriver stops
Direct sweat inlets/outlets. Screwdriver stops. LESS trim.
R115 Pressure Balance Rough Valve Body only
Female thread inlets/outlets. LESS trim.
R115SS Pressure Balance Rough Valve Body only
with Screwdriver stops
Female thread inlets/outlets. Screwdriver stops. LESS trim.
R117 Pressure Balance Rough Valve Body only
PEX inlets/Direct sweat outlets. LESS trim.
R117SS Pressure Balance Rough Valve Body only
with Screwdriver stops
PEX inlets/Direct sweat outlets. Screwdriver stops. LESS trim.
PRODUCT FEATURES:
Rough Valve Body: Durable quality that will last a lifetime.
Ideal material for prolonged contact with water.
Ceramic Disc Valve Cartridge: Assures a lifetime of
drip-free performance. Allows easy control over both water
temperature and volume.
Pressure Balancing Valve Cartridge: Maintains constant
output temperature in response to changes in relative hot and
cold supply pressure. Diaphragm system with integrated check
valves engineered to eliminate cross flow. Avoids failure due to
mineral deposits - ideal for use in hard water.
Back-to-Back Capability: Hot and cold can be reversed
quickly and easily.
Adjustable Hot Limit Safety Stop: Limits the amount of
hot water allowed to mix with cold. Reduces the risk of
accidental scalding.
Exclusive Plaster Guard: Plaster guard is designed to
protect valve during installation and serve as a mounting plate
for thin-wall installations. Two piece design allows valve to be
tested prior to trim installation.
Wide Rough-in Range: From 1-5/8" to 3-1/4".
Showerhead: Brass construction: durable quality that will last
a lifetime.
SUGGESTED SPECIFICATION:
Bath/shower fitting shall feature all brass rain 6-3/4" showerhead with Max. 2.5gpm/9.5L/min. flow rate. Shall feature a cast brass valve
body.
Shall feature ceramic disc valve cartridge which is capable of back-to-back installation. Fitting shall be equipped with
pressure balancing cartridge engineered to eliminate cross flow and avoid failure due to mineral deposits. Shall also feature hot
limit safety stop. Fitting shall be: Rough Valve Body - American Standard Model # R11____, Trim Kit - American Standard
Model # T430.50_.____.
T430.502 Bath/Shower Trim Shown
GENERAL DESCRIPTION:
TRIM KIT
All brass 6-3/4" rain showerhead. Slip-on diverter spout.
Available with metal lever handle. Showerhead:
2.5/9.5L/min. max. flow rate.
ROUGH VALVE BODY
Cast brass body, washerless ceramic disc valve cartridge
with back to back capability, integrated check valves and hot
limit safety stop. Cycles from “off” to “cold” to “hot”. Pressure
balancing cartridge maintains constant output temperature
in response to changes in relative hot and cold supply
pressure. 1/2" inlets and outlets (choice of direct sweat,
threaded, or PEX). Available with screwdriver stops.
Rough-in plaster guard designed for use as thin-wall
mounting adaptor.
Valve body will accept a variety of decorative
Bath/Shower Trims
Colony
®
Hampton
®
Town Square
®
Tropic
®
Times Square
™
Dazzle
®
Serin
®
H
O
F
F
Berwick
®
O
f
f
H
ot
Ho
t
C
o
l
d
H
C
O
F
F
C
H
Revised 10/13

Summary of content (2 pages)