Specification

B35
© 2015 AS America Inc.
Revised 5/15
BERWICK
®
PRESSURE BALANCE BATH/SHOWER FITTING
WITH FloWise
®
SHOWERHEAD
MODEL NUMBER:
TRIM KITS:
T430.508 Berwick BATH/SHOWER Trim Kit
Lever Handle. FloWise Showerhead. LESS Valve Body.
T430.507 Berwick SHOWER ONLY Trim Kit
Lever Handle. FloWise Showerhead. LESS Valve Body.
For use with R110 Series Pressure Balance Valves.
See reverse side for available Rough Valves.
T430.508 Bath/Shower Trim Shown
4" REF.
(100 mm)
4-7/8"
(124 mm)
32 mm(1-1/4")
DIA. HOLE
1/2" NPT
GENERAL DESCRIPTION:
SHOWERHEAD
FloWise water saving 3-function showerhead offers up to
40% water savings at maximum 2.0 gpm/7.6 L/min. flow rate.
WALL TUB SPOUT
Metal slip-on diverter spout.
WALL VALVE TRIM
Available with metal lever handle.
Metal wall escutcheon.
SUGGESTED SPECIFICATION:
Bath/shower fitting shall feature water saving 3-function showerhead with Max. 2.0 gpm/7.6 L/min. flow rate. Fitting shall be:
American Standard - Trim Kit Model # T430.50_.___ and Valve Body Model # R11_.
CODES AND STANDARDS
These products meet or exceed the
following codes and standards:
ANSI A 117.1
ASSE 1016
ASME A112.18.1
CSA B 125.1
*To modify a product, add suffix after the
4
th
digit (ex. T064ITP502.002)
IPS Spout
Factory
Installed
Decal Ring
(Red/Blue)
___IPT
___WD
Modifications
Parts
Suffix*
C
H
O
F
F
O
N
4"
(102 mm)
BOTTOM OF TUB
74" (1880 mm)
FOR HEAD
CLEARANCE
18" (457 mm)
OPTIONAL
4-7/8"
(124 mm) REF.
1/2" NPT
1-5/8" TO 3-1/4"
(41 mm TO 83 mm)
7-1/4" D.
(184 mm)
OPTIONAL
TO FINISHED
FLOOR USUALLY
BETWEEN
65'' AND 80''
(1651 mm AND 2032 mm)
TOP OF
TUB RIM
FINISHED WALL
1-1/2"
(38 mm) REF.
1/2"
COPPER
4-3/4"
(122 mm )
4-7/8"
(124 mm)
REF.
1-1/4" (32 mm)
DIA. HOLE
8-1/2"
(215 mm)
REF.
Shower
FLOW RATE*
GALLONS PER MINUTE
INLET PRESSURE (PSI)
*Flow rates shown are for mixed hot and cold.
0
2
4
6
8
Spout
10080604020
T430.508 Bath/Shower Trim Kit. Lever Handle. FloWise Showerhead. LESS Valve Body.
Finish Options
Product
Number
Description
T430.507 Shower Only Trim Kit. Lever Handle. FloWise Showerhead. LESS Valve Body.
Polished
Chrome
002
PVD
Satin Nickel
295
TRIM KITS *
* TRIM & ROUGH MUST BE ORDERED SEPARATELY.
R111
R111SS
R110
R110SS
R115
R115SS
R117
R117SS
R118
R118SS
R119
R119SS
Rough Valve Body less trim. Universal inlets/outlets.
Rough Valve Body less trim. Universal inlets/outlets with Screwdriver Stops.
Rough Valve Body less trim. Direct sweat inlets/outlets.
Rough Valve Body less trim. Direct sweat inlets/outlets with Screwdriver Stops.
Rough Valve Body less trim. Female Thread inlets/outlets.
Rough Valve Body less trim. Female Thread inlets/outlets with Screwdriver Stops.
Rough Valve Body less trim. PEX inlets/universal outlets for Crimp Ring PEX system (ASTM F1807).
Rough Valve Body less trim. PEX inlets/universal outlets for Crimp Ring PEX system (ASTM F1807)
with Screwdriver Stops.
Rough Valve Body less trim. PEX inlets/universal outlets for Cold Expansion PEX system (ASTM F1960).
Rough Valve Body less trim. PEX inlets/universal outlets for Cold Expansion PEX system (ASTM F1960)
with Screwdriver Stops.
Rough Valve Body less trim. CPVC inlets/universal outlets.
Rough Valve Body less trim. CPVC inlets/universal outlets with Screwdriver Stops.
Product
Number
Description
ROUGH VALVE BODIES
Meets the American Disabilities Act Guidelines and ANSI A117.1
Requirements for the physically challenged.