Installation Sheet

LPL1040BX Owner’s Manual
Location of Controls
1. 32 Super Bright LEDs
(8 LEDs in each light head - 5 White LEDs & 3 Amber LEDs)
2. Pivoting Light Heads
3. Quick Release Button: for mounting unit
4. ON/OFF Switch with Selectable Dimmer
5. Light Mode Switch: Downlight or Uplight + Downlight
6. LED Color Selector Switch
7. 8 LED Uplights
8. Self Adjusting Mounting Brackets
9. Battery Compartments
Installation
Light Positioning
This innovative light allows you to mount the light onto an umbrella pole. To do so, simply:
(1) Press the Quick Release Button to separate the light.
(2) Place the light around the pole (Fig 1) and re-connect the light. Be sure it clicks closed securely (Fig 2).
(3) Self Adjusting Mounting Brackets will grip umbrella pole securely when light Clicks closed around pole.
Each of the four light heads may be positioned independently. They can pivot 30° in any direction to
direct light where you need it.
NOTE: Each light head can only pivot 30°. To prevent damage to the unit, do NOT force the light heads.
Doing so may damage the unit and will void the warranty.
Operating Directions For ON/OFF Switch With Selectable Dimmer
1. Press once for full brightness.
2. Press and hold for desired brightness.
3. Press a third time to turn the light OFF.
Dual-Color Light Output
Each light head contains 5 Super Bright White LEDs and 3 Super Bright Amber LEDs (Amber light will reduce the attraction of insects). To select the color you
desire simply, switch the Light Color Selector Switch to the desired light color.
NOTE: Both white & amber downlight LEDs cannot be on at the same time.
Light Mode
This light can be used in one of 3 configurations:
(1) Downlights Only: White LEDs
(2)
Downlights Only: Amber LEDs
(3)
Uplights & Downlights: White LEDs only
Inserting/Replacing the Batteries
If the LEDs appear to be dim this is an indication that your batteries need to be replaced.
To Replace the Batteries
1. Remove cover to both battery compartments.
2. Remove old batteries (if replacing batteries) from both battery compartments.
3. Replace each compartment with three (3) new AA batteries.
4. Make sure to follow battery polarity guide when installing new batteries.
5. Replace battery compartments.
NOTE: This unit is designed to operate using either 6 AA or 3 AA batteries.
When using only 3 AA batteries, be sur
e to place all thr
ee batteries in one battery compartment.
The unit’s output/brightness will be the same whether using
6 AA or 3 AA batteries. However, the run time from 3 AA batteries will be less.
Battery Precautions:
1. Use only the size and type of batteries specified.
2. Always purchase the correct size and grade of battery most suitable for the intended use.
3. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to the device.
4. Do not mix alkaline, standard (Carbon-Zinc), or rechargeable (Nickel Cadmium) batteries.
5. Replace all batteries of a set at the same time. Do not mix old and new batteries.
6. Clean the battery contacts and also those of the device prior to battery installation.
7. Do not dispose of batteries in fire.
8. Remove batteries if consumed or if product is to be left unused for an extended period of time.
8
9
7
090611
1
2
3
4
5
6
AA Battery
AA Battery AA Battery
Fig 1 Fig 2
Customer Service
Answers to the most commonly asked questions can be found at www.amertac.com
Limited 2 Year Warranty
If
you recently purchased the item the quickest option is to return the product to the retailer where the item was purchased. Return policies vary by retailer. If returning the item to the retailer is not
possible visit www.amertac.com for warranty details and directions on how to have the product repaired or replaced.
LED UMBRELLA LIGHT
LPL1040BX-RiteLite Manual.indd 2 9/6/11 10:09:23 AM