Service manual

e-mail: [e-mail]; [e-mail]; website: www.amfreece.com
Phones: [phone] (Service); [phone] (Spare Parts); Fax: [phone]
Revised 03/2006
S-311
1-9
A - INTRODUCTION
7.3. Manual machine control
- order number 03.5519.0.007
- allows to change the foot machine control for
manual by switch installation on the table and
changing the cables
7. SPECIAL DEVICE
7.1. Working light
- the customer can order the light
(order number 12.0008.4.875)
Warning — It is necessary to disconnect the machine
from the main ware before instaling the light.
7.2. Adjustable cutting length steel (ACL)
- the modification AF, CT, LTT allows sewing
buuttonholes in range 16-35 mm (with the
limitation according to the machine type) without
changing the cutting steels
- moving cutting steel can be ordered under the no.
03.5519.0.011 - for machines which do not have
this cutting steel at it`s equipment only (the order
includes moving cutting steel and components
related to it; the company is recommending
AMF Reece service technician)
Machine types with possible usage of moving
cutting steels:
- standard - AF/ACL, CT/ACL, LTT/ACL
- to order - AF, CT, LTT
(if the custumer has those machines and wants
to use ACL, he must to order the components
related to this modification)