Service manual

S-311
e-mail: [e-mail]; [e-mail]; website: www.amfreece.com
Phones: [phone] (Service); [phone] (Spare Parts); Fax: [phone]
Revised 03/2006
1-18
2. NEEDLE INSTALLATION
Use needles AMF Reece 02.0505.0.111/113…. Nm 90 – 110), loading
needle bard D = 2 mm.
Needles 02.0558.1.112 are externally treated and needle shape is adapted for sewing thick material.
Thicker needles is not possible to use for standard stitching plates.
2.1. Lift the transparent needle cover up
Ê.
2.2. Loosen the screw
Ë and remove the needle.
2.3. Insert the new needle so that the needle
scarf A is on opposite side from screw
Ì of
the tension. Do not install a bent or broken
needle. Roll the needle on a flat surface to
check for straightness.
2.4. Tighten the screw
Ë well.
ËË
ËË
Ë
C - PROPER APPLICATION
120 90
90 90 — 100
80 90 — 110
Recommended Threads
No.
Needle System
(Nm)