Service manual
S-311
e-mail: service@amfreece.cz; parts@amfreece.cz; website: www.amfreece.com
Phones: +420 582 309 146 (Service); +420 582 309 286 (Spare Parts); Fax: +420 582 360 606
Revised 03/2006
1-30
D - MACHINE CONTROLS
8. SETTING THE CUTTING
Press button to set the cutting.
Possible setting:
0.2
0.2 0.2 0
0.2
+
-
+
-
0.2
+
-
+
-
0.2
0.2
20
389
CT 20
Ready
100001 0
J
1
6
6
2
7
7
3
4
4
5
5
2,2x3,0
2,8x4,2
3,0x4,6 3,2x5,0
3,4x4,2
20
389
CT 20
Ready
100001 0
J
Cutting the round eyelet:
01.3
01 012
01.3
0
389
CT 20
Ready
100001 0
J
B
Home position
Home position
Home position
Home position
Home position
a) adjustment buttonhole eyelet
b) cutting the buttonhole
eyelet
Cut before sewing the buttonhole (CB)
Cut after sewing the buttonhole (CA)
No cut
Modification RDE not function button
Modification RDE not function button
Stitches distance from cut to inner stitches of the eye
- range from
-0,5 to +1,2 mm by buttons and . Choose required value. Negative values
are usually used for sewing with CB.
+ -
Cutting space
- range from -0,5 to +1,2 mm
by buttons and . Choose required value.
Negative values are usually used for
sewing with CB.
+ -
Centering the knife cut
(axis X) - range ±1,5 mm.
To move the knife to the left, choose negative value,
to move the knife to the right, choose positive value.
Centering the knife cut
(axis Y)
- range ±1,5 mm.