Service manual

Revised 11/2006
E-mail: [e-mail]; [e-mail]; website: www.amfreece.com
Phones: [phone] (Service), [phone] (Spare Parts); Fax: [phone]
S-311+I
1-12 I
?
1
1
1 0 0 0 0
2
2
3
3
6 5 9
D - MACHINE FUNCTIONS CONTROLS
5. ERROR MESSAGES
After switching the machine off by the main switch and switching it on again, the screen that had been
set before appears on the display.
Hidden parameters can be accessed only with the password 123.
5.1 If this symbol
?
appears on the display, the distance set between buttonholes is too high.
To access the screen “distance between buttonholes”, touch the screen twice (2x).
You have to start setting up required values from the standard distance of 7 mm again.
If you wish to sew larger distances between buttonholes, you have to set up larger distance between
Indexer feet.