User Manual

- 21 -
Switching the Phone On/Off
1. Open the phone.
2. Hold the Power On/Off key for more than one second to switch
the phone on.
3. Enter the PIN code (if you have set to PIN check On), and press
OK soft key. Then your phone connects to the GSM network
automatically, and you’ll see the following display:
Note: If the phone is out of service, ‘No Service’ appears. In this case,
you cannot make or receive any calls. Wait for a better signal or move
into an open area to regain the service.
4. To switch the phone off, hold the Power On/Off key for more
than two seconds.
WARNING!
Do not switch on the phone when the mobile phone use is prohibited or
when it may cause interference or danger.
Note: The unnecessary touch of the antenna when the phone is switched
on may affect the call quality and cause the phone to operate at a higher
power level than otherwise needed.