User Manual

- 23 -
CALL FUNCTIONS
Making Calls
Before you can make or receive a call, you must turn on the phone and
be within the range of a network.
1. In Standby mode, enter the area code and phone number. (If you
make a mistake while dialing, use the e or f key to move the cursor
to the right of the digit, press the right soft key to erase; and hold it to
erase the entire number.)
Note: While entering the number, hold the # key to insert a pause (for
example: between the switchboard and the extension). The number after
the pause will be sent a few seconds after dialing the first number.
2. Press the
key to dial the number.
3. When you finish talking, press the
key or simply close the
phone to end the call.
Making International Calls
1. Hold the 0 key until a ‘+’ character apperas on the display.
2. Enter the country code, area code, and phone number, then press
the
key to begin dialling.