User Manual

- 61 -
Unit Conversion
This menu allows you to convert the original unit to the desired one.
To use the Unit Conversion, do as follows:
1. Press the c or d key to scroll to the desired category: Length,
Area, Volume and Weight.
2. Press OK or Left soft key to enter one of the categories you
desire and you can see two columns. The upper unit column is
comprised of the current units, while the lower unit column is
comprised of the units which you want to convert to.
3. Put the cursor to the upper column, press e or f key to move to
the current unit. Move the cursor to the lower column by
pressing d and press e or f key to choose one of the units that
you want the current value to be converted to.
4. Enter the current numerical value below the upper column and
the converted value will be automatically displayed below the
lower unit column.
To reset the Unit Conversion and do new conversion, press ‘Reset’ or
Left soft key.