BA-110 BASS AMPLIFIER Owner’s Manual
BA-110 BASS AMPLIFIER IMPORTANT SAFEGUARDS AND PRECAUTIONS: All Ampeg products are designed for continuous safe operation, as long as common sense is used and steps are taken to help avoid certain problems. Abiding by the following rules can help prevent damage to your amplifier, yourself and others. • The amplifier is equipped with a three-pronged AC power cord. To reduce the risk of electrical shock, NEVER remove or otherwise attempt to defeat the ground pin of the power cord.
BA-110 BASS AMPLIFIER TOP PANEL: 4 5 6 3 2 8 1 0dB -15dB Input 1 4 10 3 4 4 7 5 6 3 9 0 10 4 7 82 1 Contour Volume 2 6 2 9 0 5 3 7 5 6 3 1 9 0 10 On 7 82 8 1 9 0 10 Low Mid High CD Input Line Out Headphones 5 6 7 8 9 10 1. 0dB INPUT: Connect your “passive” bass guitar here by means of a shielded instrument cable. This input is not padded and is best suited for basses without active electronics or “hot” pickups. 2.
BA-110 BASS AMPLIFIER TECHNICAL SPECIFICATIONS: OUTPUT POWER RATING MAX INPUT LEVELS LINE OUT LEVEL HEADPHONE OUT LEVEL GAIN CONTOUR HIGH MID LOW SPEAKER SPECS POWER REQUIREMENTS SIZE AND WEIGHT 30 Watts at 4 ohms 0dB Input: 800mV RMS -15dB Input: 5V RMS CD Input: 2V RMS 2.15V RMS 1.35V RMS 40dB 10dB boost @ 50Hz 5dB cut @ 600Hz 10dB cut @ 10kHz 35dB range @10kHz 26dB range @600Hz 28dB range @100Hz 10”, 30 w, 4 ohm, 1.5” voice coil dia., 22 oz.
