User Manual

8
Opto Comp Analog Optical Compressor
Technical Specications
Signal-to-Noise Ratio 80 dB
(100 Hz @ 1.00V RMS)
Maximum Gain +14 dB
Controls
Compression Ratio, dB (I/O) Minimum: 1:1
Maximum: 10:1
Release Time Minimum: 75 milliseconds
Maximum: 600 milliseconds
Output Level Gain Mute to +14 dB
Impedances Input 1 M @ NORMAL,
166 k w/–15 dB PAD
Output 200
Power Requirements Internal: 9V Battery
External: 9V DC, ≥25 mA, center negative
Size (H x W x D) 2.2 in x 2.6 in x 4.5 in
56 mm x 66 mm x 114 mm
Weight 0.6 lb / 0.3 kg (approximately)
The Opto Comp Analog Optical Compressor is housed in a corrosion resistant, die-cast zinc chassis, so be sure
to clean it with a dry, lint-free cloth. Never spray cleaning agents on the Opto Comp Analog Optical Compressor.
Avoid abrasive cleansers which would damage the finish.
Ampeg continually develops new products and improves upon existing ones. For this reason, the specifications
and information in this manual are subject to change without notice.
Warranty and Support
Visit WWW.AMPEG.COM to...
(1) ...identify WARRANTY coverage provided in your local market. Please keep your
sales receipt in a safe place.
(2) ...REGISTER your product.
(3) ...CONTACT Technical Support, or call 818-575-3600.
www.ampeg.com
Yamaha Guitar Group, Inc.
26580 Agoura Road, Calabasas, CA 91302-1921 USA
Rev. A
© 2019 Yamaha Guitar Group, Inc. All rights reserved.
Ampeg and the Ampeg logo are trademarks or registered trademarks of Yamaha Guitar Group, Inc. in the U.S. and/or
other jurisdictions.