User Manual

Table Of Contents

PF-115HE / PF-210HE Speaker Cabinets

Rear Panel Connector Plate

HIGH

FREQUENCY

ATTENUATOR

FULL RANGE

INPUTS

OFF

–6

IMPEDANCE: 8 OHMS

POWER: 450W RMS

PF-xxxHE

1. 1/4" TS Full Range Input / Output Jacks: The jackplate features two 1/4" jacks wired

in parallel, allowing easy daisy-chaining from one speaker to another. Each of the jacks

may be used as an input or a through connection.

Connect the Speaker Output of your amplier to the cabinet’s Input jack using

a good quality (non-shielded) speaker cable (included). Never use (shielded)

instrument cable to connect speakers to an ampliﬁer.

You can utilize the unused jack as an output/through jack to connect a second 8 Ω

speaker cabinet in parallel. This will present a total load of 4 Ω to the amplier.

2. High Frequency Horn Level Switch: The 3-position HF Horn switch allows for:

• Full high frequency output (0 setting)

• High frequencies reduced by 6 dB (–6 setting)

• Horn shuto (o setting)

System Block Diagrams

PF-115HE PF-210HE

–

15" EMINENCE

8 OHM SPEAKER

TWO

PARALLEL

JACKS

–

COMPRESSION

DRIVER

CROSS

OVER

10" EMINENCE