User Manual

7
SVT-CL Bass Guitar Amplifier
Technical Specications
Preamp Tube 2 x 12AX7
Driver Tube 1 x 12AX7, 2 x 12AU7
Power Amp Tube 6 x 6550
Output Power Rating 300 Watts RMS minimum continuous @
<3% THD into 2 or 4 Ω, 0.4V RMS input
Signal to Noise Ratio 80 dB (20 Hz–20 kHz, unweighted)
Maximum Gain 67 dB @ 1 kHz, tones centered
-3 dB @ 40 Hz and 15 kHz
Tone Controls Bass: +12/–12 dB @ 40 Hz
Midrange:+10/–20 dB @ 220 Hz, 450 Hz,
800 Hz, 1.6 kHz or 3 kHz
Treble: +15/–20 dB @ 4 kHz
Ultra Lo: +2 dB @ 40 Hz, -10 dB @ 500 Hz
Ultra Hi: +9 dB @ 8 kHz
Power Requirements 10 A (Slo Blo), 120VAC, 50-60Hz, 460W (SVTCL)
10 A (Slo Blo), 100VAC, 50-60Hz, 460W (SVTCLJ)
4 A( Slo Blo), 230VAC, 50-60Hz, 460W (SVTCLU)
4 A (Slo Blo), 240VAC, 50-60Hz, 460W (SVTCLW)
Size (H x W x D) 11.5 in/292 mm (with feet) x 24.0 in/610 mm
x 13.0 in/330 mm
Weight 80 lb/36.3 kg (approximately)
The SVT-CL amplifier is covered with a durable, fabric-backed vinyl material. Clean with a dry, lint-free cloth. Never
spray cleaning agents on the SVT-CL. Avoid abrasive cleansers which would damage the finish.
Ampeg continually develops new products and improves upon existing ones. For this reason, the specifications
and information in this manual are subject to change without notice.