?\i`kX^\ JMK$+('?C= JMK$/('< 9Xjj >l`kXi :XY`e\kj Owner’s Manual
Heritage Bass Guitar Cabinets SVT-410HLF / SVT-810E TABLE OF CONTENTS Important Safety Instructions..................................................2 Introduction...........................................................................4 Eminence Speakers / Impedance: The Golden Rule..................5 Heritage SVT-410HLF Jackplate..............................................6 Heritage SVT-410HLF Hookup Diagrams..................................7 Heritage SVT-410HLF Tech Specs / Service Information......
Heritage Bass Guitar Cabinets SVT-410HLF / SVT-810E CONSIGNES DE SECURITE IMPORTANTES - LIRE, SUIVRE TOUTES LES INSTRUCTIONS ET LES PRECAUTIONS D’UTILISATION - NE PAS UTILISER PROCHE D’UNE SOURCE DE CHALEUR ET NE PAS BLOQUER OU OBSTRUER LE SYSTEME DE VENTILATION SUR CET APPAREIL.
Heritage Bass Guitar Cabinets SVT-410HLF / SVT-810E Introduction Welcome to the world of Ampeg. Whether this is your first experience with Ampeg or you’re a well-seasoned player who’s been around the globe a few times with our gear, you are taking part in a piece of musical history. From here on out, nothing else will sound the same... everything else will pale in comparison. You are one of the lucky few to take part in a new chapter of an American legacy.
Heritage Bass Guitar Cabinets SVT-410HLF / SVT-810E Eminence Speakers There are some relationships that go hand in hand in the music business. When it comes to building amplifiers and cabinets, nothing is more suited than the relation between Ampeg and Eminence Speakers. Ampeg commissioned Eminence Speakers decades ago to build one of the first 18” speakers used in an Ampeg amplifier. We’ve been calling on Eminence ever since to custom build speakers used in some of our most famous models.
Heritage Bass Guitar Cabinets SVT-410HLF / SVT-810E SVT-410HLF Jackplate 4 5 3 6 2 7 4 OHMS 500W RMS/1000 PEAK IMPEDANCE: POWER: WARNING: THIS SPEAKER IS CAPABLE OF PRODUCING SOUND PRESSURE LEVELS (SPL) WHICH CAN CAUSE HEARING IMPAIRMENTS OR LOSS.
Heritage Bass Guitar Cabinets SVT-410HLF / SVT-810E SVT-410HLF Suggested Hookup Diagrams 1 2 In the first example, a speaker cable with 1/4” ends connects from one speaker output of the amplifier to the speaker input of the Ampeg Heritage SVT-410HLF cabinet. An additional cabinet may be connected by attaching another speaker cable from the remaining 1/4” speaker output of the amplifier to a speaker input of the next cabinet. The second example is not as common, but it also works.
Heritage Bass Guitar Cabinets SVT-410HLF / SVT-810E Heritage SVT-410HLF TECHNICAL SPECIFICATIONS Type 4x10 Bass Enclosure Frequency Response (+/–3 dB) 48 Hz – 18 kHz Usable Low Frequency (–10 dB) 28 Hz RMS Power Handling Peak Power Handling 500 watts 1000 watts Impedance 4 ohms Sensitivity 98 dB SPL 1w/1m Maximum SPL 125 dB Components 4 Custom Designed Eminence 125 watt 10” speakers 1 Eminence HF Driver Size (H x W x D) 24.0 in/610 mm (with feet) x 30.
Heritage Bass Guitar Cabinets SVT-410HLF / SVT-810E SVT-810E Jackplate 1 4X10-DUAL MODE ONLY 4X10-DUAL MODE -orMONO INPUTS 2 POWER HANDLING: 800W RMS (MONO) 400W RMS (DUAL) 3 PIN 1+ = POS (+) PIN 1- = NEG (-) IMPEDANCE: 4 OHMS (MONO) 8 OHMS (DUAL) 1: 1/4” Upper 4x10 Dual Mode Input Jack 2: 1/4” Lower 4x10 Dual Mode or Mono Mode Input / Output Jacks 3: Speakon® Lower 4x10 Dual Mode or Mono Mode Input / Output Jacks The cabinet operates in Dual Mode whenever a connector is inserted into the 1/4” U
Heritage Bass Guitar Cabinets SVT-410HLF / SVT-810E SVT-810E Suggested Hookup Diagrams 1 Combined (Mono) 2 Split (Dual) In the first example, a speaker cable with 1/4” or Speakon® ends connects from the speaker output of the amplifier to the speaker input of the Ampeg Heritage SVT-810E cabinet. In example number two, a speaker cable with 1/4” ends connects from the speaker output of the amplifier to the speaker input of the Ampeg Heritage SVT-810E cabinet.
Heritage Bass Guitar Cabinets SVT-410HLF / SVT-810E Heritage SVT-810E TECHNICAL SPECIFICATIONS Type 8x10 / Dual 4x10 Bass Enclosure Frequency Response (+/–3 dB) 58 Hz – 5 kHz Usable Low Frequency (–10 dB) 40 Hz RMS Power Handling Combined / Mono Mode: 800 watts 8x10 Split / Dual Mode: 400 watts each 4x10 Peak Power Handling Combined / Mono Mode: 1600 watts 8x10 Split / Dual Mode: 800 watts each 4x10 Impedance Combined / Mono Mode: 4 ohms 8x10 Split: 8 ohms each 4x10 Sensitivit
POWER HANDLING: 800W RMS (MONO) 400W RMS (DUAL) PIN 1+ = POS (+) PIN 1- = NEG (-) IMPEDANCE: 4 OHMS (MONO) 8 OHMS (DUAL) \^Xk`i\? =C?'(+$KMJ <'(/$KMJ INSIDE jk\e`YX: iXk`l> jjX9 launaM s’renwO