Manual

PN-1 15HL F

PN-2 10HL F

PN-4 10HL F

Pro Neo Bass Guitar Cabinets

PN-115HLF / PN-210HLF / PN-410HLF

Pro Neo Suggested Hookup Diagrams

In the first example, a speaker cable with Speakon

ends connects from one speaker output of the amplifier to

the speaker input of an Ampeg Pro Neo PN-115HLF cabinet. Additionally, an Ampeg Pro Neo PN-410HLF cabinet

is connected from the remaining speaker output of the amplifier to the cabinet’s speaker input using speaker

cable with Speakon

ends.

The second example is not as common, but it also works. Plus, it is a great way to daisy-chain multiple

cabinets. A speaker cable with 1/4” or Speakon

ends is connected from one speaker output of the amplifier

to the speaker input of the Ampeg Pro Neo PN-410HLF cabinet. A Pro Neo PN-210HLF cabinet is connected by

attaching another speaker cable from an open jack (thru) of the PN-410HLF to the input jack of the PN-210HLF.

Any variation and any quantity of Ampeg Pro Neo Series cabinets may be daisy-chained this way. This is just one

example.

WARNING: Always use good quality (non-shielded) speaker cables. Never use (shielded) instrument cables to

connect speakers to an amplifier. Also, do not use both cable routes listed in example #2 above. Use one route

or the other, but not both!