SVT810E/AV Dual 4x10/8x10 Bass Cabinet
SVT-810E/AV Dual Bass Cabinet Your Ampeg SVT-810E/AV Dual Bass Cabinet is a high quality speaker cabinet suitable for all sizes of venues. The SVT-810E/AV can be “split” into two isolated 8 ohm, 4x10 cabinets via the jackplate connections. This allows each cabinet to be driven by a separate amplifier. Of course it may also be connected in the Mono Mode to create a single 4 ohm, 8x10 cabinet that may be powered by a single amplifier.
SVT-810E/AV Dual Bass Cabinet The SVT-810E/AV Jackplate: 1: 1/4” Upper 4X10 Dual Mode Input Jack 2: 1/4” Lower 4X10 Dual Mode or Mono Mode Input / Output Jacks 3: Speakon® Lower 4X10 Dual Mode or Mono Mode Input / Output Jacks The cabinet operates in the Dual Mode whenever a connector is inserted into the 1/4” Upper 4X10 Dual Mode input jack (#1). Otherwise, the cabi net operates in the single 8X10 Mono Mode.
AMPEG SVT-810E/AV Dual Bass Cabinet TECHNICAL SPECIFICATIONS: TYPE FREQ RESPONSE (+/-3dB) USABLE LOW FREQ (-10dB) RMS POWER HANDLING PEAK POWER HANDLING IMPEDANCE SENSITIVITY MAXIMUM SPL COMPONENTS DIMENSIONS (H x W x D) WEIGHT 8x10 / Dual 4x10 Bass Enclosure 58Hz – 5kHz 40Hz Combined/Mono Mode: 800 watts 8x10 Split/Dual Mode: 400 watts each 4x10 Combined/Mono Mode: 1600 watts 8x10 Split/Dual Mode: 800 watts each 4x10 Combined/Mono Mode: 4 ohms 8x10 Split: 8 ohms each 4x10 Combined/Mono Mode: 100dB SPL 1w
