TCL PULSE USER GUIDE (For iPod, iPhone and iPad)
Main Unit Location of Control 1. Snooze button / LED indicator 2. 3. 4. 5. Pair Reset Alarm Battery Compartment 6.
Features Thank you for purchasing the Vibration Alarm. This product is designed as a Vibration Alarm by working with your iPad, iPhone, iPod or other iOS devices. - With iOS version 7 or above; - With Bluetooth version 4.0. - Set wake up buzzer alarm or Vibration Alarm with snooze function, up to 10 alarms. - Take full control of the Vibration Alarm with i-device app via Bluetooth Low Energy. - Select different alarm tone pattern and volume to different alarms. - Set count down timer.
Getting started 1. Install battery: 1.1 Open the Battery Compartment. 1.2 Insert 3 x AAA batteries in polarity (+) and (-) as indicated. 1.3 Close the battery Compartment. 2. Install App on your smartphone. 2.1 Access app store and search for . 2.2 Select and install App on your mobile device.
Pairing the Vibration Alarm 3. Pair the Vibration Alarm with TCL Pulse app. 3.1 Before running the TCL Pulse app, make sure the Bluetooth is turned ON at your i-device. 3.2 After you tap the app icon , the ‘Nearby Devices’ screen appears. You need to pair the vibration alarm device before you enter the main app screen.
Pairing the Vibration Alarm 3.5 The New Vibration Alarm will be displayed on App and is ready for pairing. Tap the "New Vibration Alarm" will start the pairing 3.4 Press and hold the [PAIR] and connection process. button on the Vibration Once the Vibration Alarm Alarm device for 5 is paired, it will start time seconds. You can find and data synchronization. that the flashing LED will turn from red to blue. 3.3 Tap “ Pair New Device” to search for nearby devices.
Pairing the Vibration Alarm 3.6 After the connection is made, the following information will be synchronized: i) Current time and date ii) Alarms & timer setting iii) Unit battery level 3.7 When the Vibration Alarm is paired with one i-device, other i-devices cannot pair with it again. 3.8 One i-device can pair up to 5Vibration Alarm.
Rename the Vibration Alarm 4. Rename the device. Tap the device name (default is “Vibration Alarm”) at the top of the screen to edit the Vibration Alarm device name.
Battery status indicator 5. Battery status indicator It indicates the battery level of your Vibration Alarm device.While the battery level drops below 10%, the battery icon is in red status and a low battery warning is popped up for battery replacement remainder.
Setting the alarm time 6. Setting the alarm time 6.1 Tap [New Alarm] to create a new alarm or tap the existing alarm to modify. 6.2 The alarm setting screen appears. You can edit and adjust different items on this screen, which include: i) Alarm Name: Tap to edit you preferred name to this alarm. ii) Time: Tap to adjust the time for this alarm. iii) Day of Week: Tap to select which day of week to enable the alarm. - If none is selected, it will be as a once alarm.
Setting the alarm time v) Alarm volume level: Tap to select the alarm sound volume level (four options: Off, Low, Med and High). vi) Vibration strength: Tap to select the vibration strength (four options: Off, Low, Med and High). 6.3 Complete the alarm setting. i) Tap [Done] to save the alarm setting and go back to main screen. ii) Tap [Cancel] to restore to the original alarm setting and go back to main screen. iii) Tap [Delete Alarm] to delete the current alarm and go back to main screen.
Snooze operation 7. Using the SNOOZE function 7.1 When the alarm sounds, press the [Snooze] button to get an extra 5 minutes of sleep. The snooze will be repeated up to three times. 7.2 The above default value is set by the factory. User can set the “Maximum Snooze” and “Snooze Duration” in the preference screen.
To shut the alarm off 8. To disable the alarm 8.1 When the alarm sounds, press the [Snooze] button once or press [Alarm] to disable the alarm. 8.2 The alarm will sound for 1 minute and stop automatically. If SnoozeEnabled setting is ON, the alarm will repeat every 5 minutes. You can press the [Snooze] button to interrupt the alarm momentarily, or can press [Alarm] button to shut off the alarm and stop the snooze function completely. 8.
Setting the Timer 9. To set the timer Tap timer of main screen and to go into timer screen. 9.1 You can edit and adjust below items on this screen. i) Timer period: Turn the roller to adjust the timer period. Sound pattern: Tap to select the tone pattern (5 options plus one random pattern available). iii) Sound volume level: Tap to select the sound volume level (Four options: Off, Low, Med and High). iv) Vibration: Tap to select the vibration strength (Four options: Off, Low, Med and High).
Setting the timer 9.2 Using the Timer In the Home screen, you can tap “Start” under Timer to start counting. Then you can tap “Stop” to stop the current timer and “Start” to re-continue the timer again. The timer can be reset by tapping the [Reset].
Delete the Vibration Alarm record 10. Delete the vibration alarm record. You can click the at Nearby Devices screen to Known Devices page. By tapping “Edit” and the red minus circle, you can select “Delete” to delete the Vibration Alarm record on the current i-device.
Preference 11) Prefernce setting Tap the to enter the Preference screen. You can edit and adjust the following items on this screen. 11.1 Snooze Enabled: Tap to select ON/OFF to enable/disable the Snooze functionality. If 'Snooze Enabled' is ON, you will have two more options, which are: Maximum Snoozes: The maximum number of times to repeat the snooze function, which can be set to Unlimited or values from 1 to 9.
Preference 11.2 Alarm Sound Duration: The alarm duration, which can be set to values from 1 to 15 minutes. 11.3 Auto DST update: It will adjust Daylight Saving Time (DST) automatically based on your i-device time zone setting. The alarm clock will automatically “spring ahead” 1 hour on the second Sunday in March at 2:00AM, and “fall back” 1 hour on the first Sunday in November at 2:00AM, according to your i-device’s time zone. 11.4 Device Version: The vibration alarm firmware version is shown for reference.
Reset the Vibration Alarm 12. Reset the Viration Alarm If the vibation alarm is not working properly, press RESET button with a pointed object, the LED flashes twice in (purple) color and the vibration box vibrates twice meanwhile. Then the LED will flash once per 6 seconds in red color. After reset, all data in the vibration alarm is deleted. And you need to press and hold the [PAIR] button again to re-pair the vibration alarm.
Care of Your Vibration Alarm unit
Disposal of Your Old Product Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste.
Warranty AMPLIFYZE equipment is produced and tested according to the latest production methods. The implementation of carefully chosen materials and highly developed technologies ensure trouble free functioning and a long service life. The terms of the warranty do not apply where the cause of the equipment malfunction is the fault of the telephone network operator or any interposed private branch extension system.
Questions? Amplifyze Service Center 3018 Ambrose Avenue Nashville, TN 37207 V/TTY: 1-866-267-5426 www.tclpulse.