Operation Manual

Helpline UK 0844 800 6503
(See page 36 for costs and hours of operation)
GETTING STARTED
9
Drill two holes whose distance apart corresponds
to the bracket to be used, insert the screws and
allow them to project 5 mm from the wall.
Position the telephone on the bracket, fit the
screws in the slots and slide the telephone down-
wards a little.
Turn the receiver hook (4) in the receiver cradle
180° so that the receiver can be hooked in.
Warning: Ensure that there are no cables or pipes etc. under the surface of
the wall where you want to drill the holes.
4
4
4
4
4