Operation Manual

Settings and Functions

Setting the snooze delay

SNOOZE

0m 5m 15m

Use the sliding switch (9) to set the interval for the

snooze delay. There are three settings available,

from left to right 0 min", 5 min" or 15 min.".

Activating the snooze delay

If the snooze button is pressed at anytime when the light is

switched off, then the illumination will switch on for 30 seconds

to allow the user to see the time. After 30 seconds the

illumination will go out.

SNOOZE

Press the Snooze button (1) to interrupt

the alarm for a specific time before it

automatically resumes. To activate the

Snooze function, refer to Setting the

snooze delay".

Activating the vibration pad

After having connected the vibration pad

supplied, you can use the switch on the

vibration pad to switch the vibration

function on and off. There are two settings

available, from left to right On" or Off".

0844 800 6503 (Using an UK landline, at the time of going to print: calls cost 6p for connection charge and then 5p a minute. Mobile costs may vary.)