Operation Manual

Getting started
Connecting the transmitter
Option 1
1 Set the selector switch on the transmitter base to stereo mode (ST).
2 Use the provided audio cable (and audio adapter, if necessary) to con-
nect “TV Audio“ on the transmitter base to the audio-out jacks on your
TV as shown.
3 Connect and plug in the AC adapter as shown. The IR diodes glow
behind the IR transmitter window as long as the TV/sound source is on
to indicate that signals are being transmitted.
4 Set the TV volume to a comfortable level. On many TV sets, you may
“Mute“ the TV speaker output and still be able to hear via the TV 150.
Important: please make sure you’ve read the safety information on page
22 before you set up your device.
GETTING STARTED
16
Helpline UK 0844 800 6503
(See page 24 for costs and hours of operation)